- Stock: In Stock
- Model: PEACO-ZJR2-3550
- SKU: PEACO-SS10
Features
- Smart start. The intelligent motor soft starter comes with various startup modes, including limited current startup mode, voltage ramp startup mode, sudden start mode, current ramp startup, and voltage current limiting double closed-loop startup.
- Multifunctional operation panel. LCD for soft starter displays parameters intuitively and is easy to operate.
- High continuity terminals. Reliable soft starter features high-conductivity terminals made of quality and thickened material and good electrical conductivity is available.
- Powerful cooling. The motor soft starter provides effective heat dissipation protection to quickly reduce the operating temperature.
- Multiple protections in one machine. The smart motor soft starter is available with overcurrent, overload, overheat, low voltage, high voltage, load short circuit, output phase loss, input phase loss, and three-phase unbalance protections.
- High and low-temperature resistance. The three-phase soft starter is made of industrial-grade ABS plastics with high impact resistance, high heat resistance, stable, and good performance.
Specification
Product Name: Intelligent Motor Soft Starter
Model: PEACO-ZJR2-3550
Capacity: 75 hp (55 kW)
Current: 110A at 380V
Input Voltage*: Three phase 220V, 240V, 380V, 400V, 415V, 440V, 460V, 480V, 690V
Frequency: 50Hz/ 60Hz
Adaptive Motor: Squirrel-cage three-phase asynchronous motor
Starting Times: It is recommended not to exceed 20 times per hour.
Control Mode
1) Operation panel control.
2) Operation panel + external control.
3) External control.
4) External control + COM control.
5) Operation panel + external + COM control.
6) Operation panel + COM control.
7) COM control.
8) No start or stop operation.
Start Mode
1) Current-limiting to start.
2) Voltage ramp to start.
3) Torque control + current-limiting to start.
4) Torque control + voltage ramp to start.
5) Current ramp to start.
6) Voltage current-limiting double closed-loop start.
Stop Mode
1) Soft stop.
2) Free stop.
Protective Function:
1) Open loop protection for external instantaneous stop terminals.
2) Over-heat protection for soft starters.
3) Protection for too long starting time.
4) Input open phase protection.
5) Output open phase protection.
6) Unbalanced three-phase protection.
7) Starting over current protection.
8) Running overload protection.
9) Under voltage protection for power voltage.
10) Overvoltage protection for power voltage.
11) Protection for fault parameter setting of the soft starter.
12) Load short circuit protection.
13) Auto restart or incorrect wiring protection.
14) Incorrect wiring protection of external control stop terminals.
Ambient
A place to be used: Indoor location with good ventilation free from corrosive gas and conductive dust.
Altitude: Below 1000M. It has to increase the soft starter rate power when the altitude is more than 1000M.
Temperature: -30℃~+55℃
Humidity: ≤90% RH (without dew condensation)
Vibration: ＜0.5G
Structure
Enclosure: IP 20
Cooling: Natural wind cooling.
Certification: CE, ISO9001
Warranty: 12 months
Outline Dimension (W1*H1*D): 145*270*160mm
Installation Dimension(W2*H2*d): 130*245*M6
Weight: 3.5 kg
Note: This model of the soft starter is without bypass, you need to connect an external AC contactor. If you want the soft starter with a built-in bypass where there is an AC contactor inside, please visit here 75 hp (55 kW) Soft Starter with Built-in AC Contactor.
Softer Starter Outline & Installation Dimension (Unit: mm)
Soft Start Wiring Diagram
Soft Starter Detail Presentation
- Simple control panel. The control panel can be removed to clean, easy-to-operate, real-time data display on an LCD screen.
- Smart mainboard. Soft starter features fast response and multi-functions.
- Power control transformer. It comes with energy-saving, circulating circuits, and high-quality coils with insulation isolation.
- Mutual inductor. the mutual inductor makes the soft starter more standard for measuring instruments, protection equipment, and automatic control equipment.
Why do water pumps need soft starters?
The water hammer effect is a very common phenomenon. When the water pump is running normally, if there is a sudden power outage or the valve is suddenly closed, the water flow will suddenly decrease. Due to the inertia of the water flow and pressure, the water flow shock wave generated will be like a hammer beating back and forth. The force generated can sometimes be so great that it can damage valves and pumps.
Using a soft starter, you can control the voltage and current at which the motor starts, allowing the motor to start and stop smoothly. Therefore, soft starters are widely used in the market, and the soft stop function of the soft starter can effectively avoid the water hammer effect produced when the water pump stops.
