16A Industrial Plug and Socket, 4 Pin, IP44

Industrial plug and sockets provide current of 16A, 4 pin (3P+E) and protection grade is IP44. Best male and female connectors are used indoors. Model TYP233 male connectors can be matched with four types of female commectors and sockets for your different requirements, they are IEC connectors with high quality and performance.

Connector Features

• Model TYP233 industrial plug is a male connector for clamping cable, featuring 16A, 3P+E, IP44. The plug provides 3 pins with high quality material, cable outer diameter range up to Ø10-13mm, cable gland and seal and strain relief to prevent cable breaking.Contact material is brass with nickel plating, Nylon shell and fiberglass reinforced plastics for insert.
• Model TYP2618 industrial socket comes with cable clamp, 16A, 2P+E, IP44, can be matched with model TYP233 connector as male and female connectors.
• Model TYP5618 panel mounted socket provides 16A current, 3 pin (3P+E), IP44, flange 55*60mm and comes with screw terminals and cover for protection, is a traight type of industrial socke, is suitable for use in harsh enviroment under 25 ℃.
• Model TYP3618 industrial socket outlet for panel mounting is a kind of angled panel mount socket with 20 degree and its flange size is 74*62mm, IP44 protection rating, 16A and 4-pin.
• Model TYP6618 surface mounted socket features screw terminals, two cable inlets (open top and closed bottom), protection cover and housing with screw locking is provided and there is more wiring space.
• Industrial plugs and sockets are widely used in factory power supply configuration, mechanical equipment, construction sites, ports, mines, etc. and suitable for water supply, drainage and sewage treatment projects.
  

Technical Parameters

• Current : 16A
  
• Pole : 4 (4-pin / 3P+E)
• Optional voltage : 110V (50-60Hz) / 230V (50-60Hz) / 400V (50-60Hz) / 500V (50-60Hz) / 100-300Hz (>50V) / 300-500Hz (>50V)
  
• Coupling : Screw
• Shell material : Nylon
• Contact material : Brass with nickel plating
• Temperature rage : -25℃ ~ +85℃
• Insulation resistance : 500V~1min ＞5MΩ
• Rated voltage : 200-250V AC, 50/60Hz
• Test voltage 1min : 2500V AC
• Insert material : Fiberglass reinforced plastics
• IP rating : IP44
• Certification : IEC 60309-1, IEC 60309-2, GB/T11918.1, GB/T11918.2, CE
  

Dimension (Unit: mm)

Model TYP233 Male Connector

• Min. wire size : 1.5mm2
• Max. wire size : 4mm2
• Cable outer diameter range : 10-13mm
• Net Weight : 150g

Model TYP2618 Female Connector

• Min. wire size : 1.5mm2
  
• Max. wire size : 4mm2
• Cable outer diameter range : 10-13mm
• With cable clamp.
• Net Weight : 190g

Model TYP5618 Panel Mounted Socket

• Min. wire size : 1.5mm2
• Max. wire size : 4mm2
• Flange : 65*65mm
• Net Weight : 135g
  

Model TYP3618 Panel Mounted Socket

• Min. wire size : 1.5mm2
• Max. wire size : 4mm2
• Angle : 20°
• Flange : 74*62mm
• Net Weight : 160g
  

Model TYP6618 Surface Mounted Socket

• Min. wire size : 1.5mm2
• Max. wire size : 4mm2
• Cable inlets : one top hole (open) and one bottom hole (closed)
• Net Weight : 205g

The Difference between IP44 and IP67 Protection Grade for Industrial Connectors

The protection grade of industrial plugs and sockets is generally classified into IP44 and IP67.

IP44 protection: The industrial connectors with IP44 can prevent the hazard of above 1mm dust particles and can also protect the hazard of water spray from all directions. Generally speaking, such industrial plugs and sockets are usually used indoors.

IP67 protection: The IP6 industrial connectors can completely prevent the dust hazards as well as the hazards of high-pressure water spray in all directions and also protect the harmful effects of immersion in water depths of 15cm to 1m for half an hour. Such industrial plugs and sockets suit well for safer and more reliable for outdoor use.