2 hp VFD, Single Phase to Three Phase
- Stock: In Stock
- Model: PEACO-FC110-2S/4T-1.5G
- SKU: PEACO-STVFD-2
$215.69
Ex Tax: $215.69
2 hp/1.5 kW VFD is a general purpose VFD, single phase 220V-240V AC to three-phase AC variable speed drive that controls speed, torque, and direction of induction motors. IP20 protective enclosure for inner use, small size, and easy to install. Cost-effective variable frequency drives for your motor to solve the non-availability of a three-phase input supply.
Our VFDs are suitable for single-phase and split-phase input power supply.
For the VFD user manual, please contact us.
Navigation: Motor Controls > Variable Frequency Drives >1 Phase to 3 Phase VFD > 2 hp VFD, Single Phase to Three Phase
Specifications
| Basic Features | Model | PEACO-FC110-2S/4T-1.5G |
| Code | G: Constant torque, P: Pump motor | |
| Rated capacity | 1.5kW | |
| Rated input current | 11A | |
| Rated output current | 3.7A | |
| Input rated voltage | 220V | |
| Input rated frequency | 50/60Hz | |
| Output rated voltage | 380V | |
| Allowable output voltage range | 320V~460V | |
| Output frequency | Vector control: 300 Hz, V/F control: 3200 Hz | |
| Adoptable motor type* | Squirrel cage induction motor, asynchronous motor (Contact us for Permanent Magnet Motor) | |
| Control Features | Control mode | Open-loop vector control (SVC), Closed-loop vector control (FVC), V/F control |
| Input frequency resolution | Digital setting: 0.01 Hz, Analog setting: Maximum frequency*0.025% | |
| Carrier frequency | 0.5 kHZ-16kHZ, Automatically adjusted based on load features. | |
| Torque control/Steady speed accuracy | ±5%（FVC)/ ±0.5%>（SVC), ±0.02%（FVC) | |
| Start-up torque | G-type: 0.5 Hz/150%, 0 Hz/180% (FVC), P type: 0.5Hz (FVC) | |
| Overload capacity | G-type: 150% rated current 60s, 180% rated current 3s, P-type: 120% rated current 60s; 180% rated current 3s | |
| Ramp mode | Straight-line ramp or S-curve ramp, Four groups of acceleration /deceleration time with the range of 0.0s-6500.0s | |
| DC braking | 0.00Hz - maximum output frequency, Braking time: 0.0s - 36.0s Braking action current value: 0.0% - 100.0%. | |
| JOG control | JOG frequency range: 0.00Hz-50.00Hz, JOG acceleration / deceleration time: 0.0s-6500.0s | |
| Build-in PID | Realizes process-controlled closed-loop control system easily. | |
| Automatic voltage adjustment (AVR) | Maintain constant output voltage automatically when the main voltage changes. | |
| Individualized Function | Safety self-inspection of power on peripheral equipment | Safety detection of peripheral equipment such as grounding, short circuits, and so on. |
| Over-voltage and Over-loss speed control | Automatic limit of current and voltage during operation to prevent frequent over-current and over-voltage tripping | |
| Fast current limit | Minimizing overcurrent fault and protecting frequency converter in normal operation | |
| Common DC Bus function | Common DC bus functions of multiple frequency converters. | |
| Quick key | User-defined shortcut menu | |
| MF.K key | Programmable Key: Command channel Switching/forward and reverse running/JOG running function selection | |
| Textile swing frequency control | Given the length control function | |
| Timing control | Timing control function: setting time range 0h-65535hr | |
| Running command sources | Running command sources | Three channels: operation panel, control terminal, and serial communication port. They can be switched over between these sources in various ways. |
| Frequency sources | 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting, and serial communication port setting. They can be switched over these sources in various ways. | |
| Auxiliary frequency command | 10 kinds of auxiliary frequency instructions. It can realize auxiliary frequency fine adjustment and frequency synthesis flexibly. | |
| Input terminal | 7-Digital Input terminal, where X5 is compatible with high-speed pulse input. Suitable for PNP or NPN input mode. | |
| 2-Analog Input terminal 0-10V/0-20 mA. To be used as voltage or current input. | ||
| Output terminal | 3-Digital output terminals and 2-Relay output terminals. | |
| 1-High speed output terminal DO, 0 kHZ-100 kHz square wave signal output, It can realize the set frequency, output frequency, and other physical quantities. | ||
| 2-Analog output terminal 0-10V/0-20 mA. To be used as voltage or current output. | ||
| Display and keyboard | LED display | Display monitoring parameters, output frequency, set frequency, bus voltage, etc. |
| Keyboard lock and function selection | To realize partial or total lock of keys, define the scope of action of some keys, to prevent mis-operation. | |
| Protection function | Short circuit detection, input and output phase loss protection, overcurrent protection, overvoltage protection, under-voltage protection, overheat protection, and overload protection. | |
| Brake unit | Build-in brake unit | |
| Environment | Installation location | Indoor, free from direct sunlight, dust-free, corrosive gases, combustible gases, oil smoke, vapor, drip or salt, etc. |
| Altitude | <1000m | |
| Ambient temperature | < 95 % RH, no water droplet condensation | |
| Humidity | -10°C~ +40°C (ambient temperature is 40°C-50°C , please de-rate to use) | |
| Vibration | <5.9m/s 2 (0.6g) | |
| Storage temperature | -20℃～＋60℃ | |
| IP level | IP20 | |
| Pollution grade | PD2 | |
| External Accessories* | Matched optional Brake resistance, input EMC filter, output EMC filter, input AC reactor, output AC reactor, energy regenerated reactor, harmonic filter, and sine wave filter (excluding VFD price). | |
1. * denotes the parameters are optional or customized and please select every parameter in drop-down lists to complete your order.
2. Please contact us for the external accessories catalog and price.
AC Drive Dimension (Unit: mm)
| A | H | D | W | B | Φ | Weight |
| 118 | 185 | 157 | 106 | 175 | Φ4.5 | 2kg |
KNOWLEDGE BASE
Why does the VFD voltage change in proportion to the frequency?
The torque of an asynchronous motor is produced by the interaction between the magnetic flux of the motor and the current flowing in the rotor. Under the rated frequency, if the voltage is constant and the frequency is only reduced, then the magnetic flux will be too large and the magnetic circuit will be saturated, which may lead to the motor burning. Therefore, the frequency and voltage should be varied proportionally. In other words, the variable frequency drive is controlled to output voltage while the frequency changes, so that the magnetic flux of t the AC motor remains constant and the phenomenon of magnetic field weakening and magnetic saturation will not happen. Such VFD is more suitable for fans and pumps for motor speed control to save energy.
