Low Speed Linear Actuator, 1mm/s, 24V

Low speed linear actuator provides 1mm/s±10% travel speed, 24V/ 48V DC voltage, max. dynamic load 20kN, max. static load 50kN (half way), 200mm~400mm stroke length. Front and rear end can be Φ25 joint bearing or the custom M20*1.5 male screw, length: 40mm. Hall sensor position feedback is optional.

Specification:

• Model: PEACO-DJ817G
• Operating Voltage*: 24V DC or 48V DC
• No-load speed: 1.0mm/s±10%
• Full load current: <4A
• Max. dynamic load: 20 kN
• Max. static load: 50 kN (half way)
• Stroke*: 200~400±3mm
• Min. installation distance (mm) : 530 + stroke length (S)
• Front connector*: M20*1.5 male screw, Length: 40mm (or Φ25 joint bearing)
• End connector*: M20*1.5 male screw, Length: 40mm (or Φ25 joint bearing)
• Power cable: 2 meters
• Plug form: Bare wire
• Applicable ambient temperature: -40℃-60℃
• Protection class: IP65

Note: * denotes optional or customized parameters and you can select every parameter in drop-down lists to complete your order.

Linear Actuator Dimension (mm):

Minimum Installation Length L = 530+S where S is the Stroke length