High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
- Stock: In Stock
- Model: PEACO-DJ810
- SKU: PEACO-DJ810
$139.68
Ex Tax: $139.68
High speed linear actuator comes with 32mm/s travel speed, 12V/ 24V DC voltage, max. dynamic load 4000N, standard & custom 50mm~600mm stroke length, aluminum alloy shaft, limit switches built at both ends, hall sensor position feedback is available. It is also a hospital bed linear actuator widely applied to indoor massage chairs, functional sofas, automatic window openings, medical equipment, etc.
- For more industrial linear actuators, please visit here Peaco Support Industrial Linear Actuators Catalog.
- For more medical linear actuators, please visit here Peaco Support Medical Linear Actuators Catalog.
- For lifting columns and remotes, please visit Peaco Support Lifting Columns and Remotes Catalog.
Features
- With micro DC permanent magnet motor, small size, low noise about 40db, waterproof, easy to install.
- Optional 50mm~600mm stroke length, 50N~4000N load capacity and other strokes and loads can be customized according to your needs.
- High speed linear actuator, max. working speed up to 32mm/s.
- Signal feedback Hall semsor is supported.
- Comes with built-in limit switches to prevent over travel (extension, with safety nut.
- Equipped with metal gear, stable quality and long service life.
- Can automatically stop at fully open and fully close position.
- Widely used in robotic vehicles, automatic guidance vehicles, camper, door openers, floor cleaning equipment, lawn mower, snow plow, boat, solar tracker system, wheelchairs, harvesting machine, construction machine, etc.
Specification
| Model | PEACO-DJ810 |
| Input Voltage* | 12V/24VDC |
| Stroke Length* | 50/ 100/ 150/ 200/ 250/ 300/ 350/ 400/ 450/ 500/ 550/ 600mm (Optional and other strokes can be customized) |
| Load Capacity* | 50/ 100/ 150/ 200/ 400/ 450/ 500/ 600/ 700/ 800/ 1000/ 1200N/ 1500N/ 2000N/ 3000N/ 4000N (Optional and other loads can be customized) |
| Max. Dynamic Load | 4000N |
| Travel Speed | 5 to 32mm/s |
| Limited Switch | Integrated |
| Duty Cycle | 10% (2 min continous moving) |
| IP Rating | IP43 (indoor use) |
| Operating Temprature | -40°C~+65°C |
| Signal Feedback* | Hall sensor |
| Cable Length | 800mm |
| Certification | CE |
| Weight | 1kg-8 kg |
Note: * denotes optional or customized parameters and you can select every parameter in drop-down lists to complete your order.
Linear Actuator Load, Stroke and Speed Selection
| Code* | Dynamic Load (N) | Speed±10% (mm/s) | Current (amp) (in normal temperature) | ||
| 24V | |||||
| Free Load | Full Load | Free Load | Full Load | ||
| A | 4000 | 5 | 4 | ＜1.2 | ＜3.5 |
| B | 3000 | 7 | 5.2 | ＜1.2 | ＜3.5 |
| C | 2500 | 10 | 8.1 | ＜1.2 | ＜3.5 |
| D | 2000 | 13 | 10.4 | ＜1.2 | ＜3.5 |
| E | 1500 | 16 | 11 | ＜1.2 | ＜3.5 |
| F | 1000 | 20 | 15 | ＜1.2 | ＜3.5 |
| G | 800 | 32 | 23.5 | ＜1.2 | ＜3.5 |
Note: The data above are typically made with a stable power supply and an ambient temperature.
Linear Actuator Dimension (mm)
Strokes in Different Load Ranges
| S: Stroke Range (mm) | Load capacity (N) |
| 20≤S≤250 | 4000 |
| 20<S≤350 | 3000 |
| 350<S≤450 | 2000 |
| 450<S≤600 | 1000 |
| 600<S≤800 | 500 |
| 800<S | 200 |
For safety reasons, an additional installation length is required if a long stroke is required.
S: Stroke Length, L: Installation Length
L=S+150 (20mm＜S ≤ 250mm), (250mm＜S ≤ 350mm), (350mm＜S ≤ 450mm)
L=S+175 (450mm＜S ≤600mm)
L=S+225 (600＜S ≤800)
L=S+300 (800mm＜S)
Linear Actuator Applications
