30 kVA Isolation Transformer, 3 Phase, 480V to 400V
- Stock: In Stock
- Model: PEACO-SG-30KVA
- SKU: PEACO-SG-30KVA
$5,257.69
Ex Tax: $5,257.69
30 kVA isolation transformer is a three phase isolation transformer with optional primary and secondary voltages, 480 Volt to 400 Volt, 416 Volt to 208Y/120 Volt, enameled copper or aluminum wire and delta connection and star connection, 50Hz/60Hz frequency, working efficiency up to 98%. Cost-effective 1 to 1 isolation transformer is frequently used for medical device, robot device, etc.
Technical Parameters
- Model : PEACO-SG-30KVA
- Capacity* : 30 kVA (Customized)
- Frequency : 50Hz/60Hz
- Primary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V...(Customized)
- Secondary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V...(Customized)
- Withstand voltage test : 100% tested. Primary to secondary 2.5kV AC/min; Primary to safety ground 2.5kV AC/min; Secondary to safety ground 2.5kV AC/min. (does not have both puncture and break-down)
- Insulation resistance : >100MΩ / DC500V
- Insulation class : B/H
- Overload capability : 300% for 10 seconds, 150% for 120 seconds
- Efficiency : ≥98%
- Short circuit impedance : 4%
- Total Harmonic Distortion : ≤1%
- Power factor : 0.8
- Primary to secondary winding isolation voltage : 1000V~3000V
- Connection type* : standard Dyn11 and customized Ynyn0, Yd11, Dd0. Dyn5. Dzn0, etc, as per customer requriements.
- Temperature rise limit : 100K (actual temperature minus ambient temperature)
- Enclosure protection grade : standard IP22 indoor ( contact us for customized electrostatic shield or IP54, IP65 outdoor).
- Cooling mode : Natural cooling / fan system cooling
Transformer Material
- Material : Transformer coil adopts 200 degree high temperature copper or aluminum wire.
- Winding material* : 100% copper or aluminum (Optional)
Working Environment
- Noise : ≤ 45dB (within 1m)
- Environment temperature : -20℃~+50℃, indoor enclosure, floor-mounted
Quality Assurance
- Standard : IEC60076-1, VDE0550, IEC439, JB5555, GB5226, etc.
- Certification : CE, RoHS and ISO:9001
- Design Life : 30 years
- Warranty : 1 years
Note: * denotes optional and customized parameters and you can select every parameter in drop-down lists to complete your order.
Features and Benefits
Isolation transformers prevent transmission of the DC component in signals from one circuit to the other, but allow AC components in signals to pass. Such an isolation ransformer provides a ratio of 1 to 1 between the primary and secondary windings, is widely used to protect secondary circuits and individuals from electrical shocks between energized conductors and earth ground. Additionally, the 1 to 1 isolation transformer has the function of anti-harmonic interference caused by ground loops and comes with electrostatic shields so that such transformers are used for power supplies for sensitive equipment, such as computers, medical equipment, audio equipment, robot devices or laboratory instruments.
- Silicon Steel Sheet: New cold rolled silicon steel sheet, 0.27mm, 0.30mm, 0.35mm of thickness, excellent performance.
- Terminal Block: High quality terminal block, excellent temperature resistance, pressure resistance and flame retardancy for small power. For high power, made of quality copper material, with good electrical conductivity, high temperature resistance, not easy to burn out the equipment when short circuit happens.
- Enameled Wires: H class enamelled copper/aluminum wires, temperature resistance 200℃, winded tightly and uniformly, no insulating layer, high heat dissipation, service life ≥35 years.
- Bobbin: The bobbin of isolation transformer is made of nylon, high temperature resistance, great flame retardancy. The high power transformer with frameless design has ventilation slots between the coils for smooth air flows which reduce temperature of coils.
- Insulation Process: The 30 kVA isolation transformer adopts H-class vacuum impregnated insulation, temperature resistance of 200°C, lower noise, better insulation and is anti-rust and anti-corrosion.
30 kVA Isolation Transformer Dimension (Unit:mm)
| Types | Dimension | Weight | |||
| Open Type (A*B*C) | Mounting Size (D*E) | Enclosed Type (A*B*C) | Open Type | Enclosed Type | |
| Aluminium Wire Transformer | 440*350*430mm | 300*205mm | 420*610*610mm | 140kg | 165kg |
| Copper Wire Transformer | 440*340*420mm | 300*195mm | 420*610*610mm | 160kg | 185kg |
Isolation Transformer Schematic Diagram
Peaco Support provides a wide selection of isolation transformers, including single phase isolation transformer and three phase isolation transformer, custom isolation transformer with special input and output voltages is also available. For example, 240V to 240V isolation transformer, 440V to 230V step down transformer, 380V to 460V step up transformer, etc. can be also customized.
