Reaction Torque Sensor, 1 Nm-200 Nm, for Torque Wrench Calibration

This reaction torque sensor is a torque transducer for non-rotating torque measurement and for torque wrench calibration. Optional 1 Nm/ 5 Nm/ 10 Nm/ 20Nm/ 30Nm/ 50 Nm/ 100 Nm/ 200 Nm capacity, 2.0mV/V ±10% output sensitivity. A digital load cell amplifier can be matched can be used with the torque sensor to get DC 4-20mA, DC 0-5V, DC 0-10V, RS485 output signal for easy data acquisition.

Reaction Torque Sensor Features

• Wide range of torque sensor capacity. 1 Nm-200 Nm. 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 30 Nm, 50 Nm, 100 Nm, 200 Nm available for your choice.
• Custom torque sensor capacity. Torque sensor capacity can be customized for you if you have special requirements.
• Optional amplifier. A digital load cell amplifier is integrated with high accuracy 24-bit ADC (±0.2%FS ±1 byte), up to 80 times/s sampling speed making it suitable for both static measurement and dynamic measurement. It supports RS485 communication interface and amplified signal output 0-10V/ 0-5V/ 4-20mA proportional to the measured torque.
• Small size, light weight, a 5 pin male plug and no mounting base, easy to install and convenient use.
• The reaction torque sensor can be for non-rotating torque measurement and for torque wrench calibration with high detection accuracy, good stability.
• The static torque can be continuously measured without repeated zero adjustment.
• Comes with strong anti-interference, can be installed in any position and any direction.
• The strain elastomer is strong and can bear 150% load.

Reaction Torque Sensor Specifications

• Model: PEACO-DYJN102
• Capacity: 1 Nm-200 Nm. 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 30 Nm, 50 Nm, 100 Nm, 200 Nm (Optional)
• Output signal: 0-20mA, 0-10V, 0-5V, 4-20mA, RS485 (Optional)
• Material: aluminum alloy
• Output sensitivity: 2.0mV/V±10%
• Zero balance: ±2% F.S.
• Non-linearity: 0.3% F.S
• Hysteresis: 0.1% F.S.
• Repeatability: 0.1% F.S
• Creep: 0.1%FS/30min
• Temperature drift on zero: 0.05% F.S/10℃
• Temperature effect on output: 0.05% F.S/10℃
• Response frequency: 10kHz
• Impedance: 350Ω
• Insulation resistance: ≥5000MΩ/100VDC
• Excitation voltage: DC 5-15V
• Operating temperature: -20℃~+80℃
• Humidity: 0~90% RH
• Safety overload: 120%
• Ultimate overload: 150%
• Protection class: IP65
• Cable size: Φ5mm x 3m
• Cable ultimate pull: 10kg
• Wiring: Exc+: Red, Exc-: Black, Sig+: Green, Sig-: White
• Warranty: 12 months
• Weight: 2 kg

Reaction Torque Sensor Applications

The high-precision static torque sensor is widely used in the measurement of static discontinuous rotation in industrial processes such as torque wrenches for its excellent reliability.

Reaction Torque Sensor Dimension (unit: mm)

Sensor Wiring Diagram & Sensor Force Diagram