6V/12V Car Battery Charger, 1A, 110V/220V Input

Cost-effective car battery charger is both 6 volt battery charger and 12 volt battery charger, 1000mA charging current, 110V-120V 60Hz, 220V-240V AC 50Hz input voltage, full copper wire for less heat and stable output current. High quality vehicle battery charger for charging 6V lead-acid battery, 12V lead-acid, AGM and Lithium battery.

Features

1. Three-stage smart charger

• Constant current charging stage. The charging current of the charger remains constant, the charged power increases rapidly and the battery voltage rises.
• Constant voltage charging stage. The charging voltage of the charger remains constant, the charged power continues to increase, the battery voltage rises slowly and the charging current drops.
• The battery is fully charged, the charging current drops below the float conversion current and the charging voltage of charger drops to the float voltage.
• Floating charging stage. The charging voltage of the car charger remains the same as floating charging voltage.

2. The portable car battery charger is designed for 6 volt/12 volt lead-acid automobile and motorcycle batteries, including Wet, Gel, MF, EFB, AGM and Lithium battery.

3. The car battery charger is not only a trickle charger, but also an advanced battery maintainer. With fully-automatic shutdown design and full protections against overcharge, over-voltage, overheat, over-time charging and short circuit, intuitive reverse polarity and battery power LED indicators.

4. 12V battery charger is compatible with all types of vehicles, including cars, motorcycles, lawn mowers, ATVs, lawn tractors, trucks, SUVs, boats, etc.

5. Wide Application. The F1000 is designed for charging all types of 6V & 12V lead-acid batteries, including Wet (Flooded), Gel, MF (maintenance-free), EFB (Enhanced Flooded Battery), AGM (Absorption Glass Mat) batteries and Lithium battery. It is suitable for charging battery whose capacities are up to 30 Amp and maintaining the batteries.

Specifications

• Model: PEACO-F1000
• Input Voltage: 110V-120V 60Hz, 220V-240V AC 50Hz
• Effectiveness: ＞75%
• Power: max. 15W
• Charging Voltage: 14.4V-14.8V
• Charging Current: 1A (6V) / 1A (12V)
• Low Voltage Detection: 2V (6V) / 2V (12V)
• Persistent Current: 100mA
• Output Voltage: 6V / 12V
• Input Current: 1000mA
• Charge Type: Three-stage smart charger
• Type of Battery: 6V & 12V
• Waterproof Protection: IP60
• Battery Chemistry: Wet, Gel, MF, EFB, AGM and Lithium battery
• Shell Material: Flame retardant ABS material
• Cooling Method: Natural cooling
• Function Protection: Output short circuit, over temperature, low voltage, over voltage, reverse connection protections.
• Switch Type: PWM (pulse width modulation)
• Ambient Temperature: 0℃ ~ 40℃
• Storage Temperature: -10℃~70℃
• Relative Humidity: 20%~90% non-condensation
• Power Cord Length: 2.6m
• Product Dimension: 118*70*81mm
• Weight: 0.3kg
• Certification: CE, RoHS, FCC, IATF16949:2016
• Warranty: 12 months

6V/12V Car Battery Charger Details

How to Use Smart Car Battery Charger?

1. Switch to the mains and enter the standby state. The charging indicator (white) lights two times and power indicator (green) is always on.

2. Battery type selection. Press MODE to switch (12V lead-acid battery, 12V AGM battery, 12V lithium battery, 6V lead-acid battery).

3. Reverse connection protection. When the positive pole of the battery clip is connected to the negative pole and the negative pole is connected to the positive pole, the warning light (red) flashes.

4. Normal power connection. When the positive pole of the battery clamp is connected to the positive pole, and the negative pole is connected to the negative pole, the charging indicator (white) flashes.

5. Battery full power state. Four charging indicators are always on.