Heavy duty VFD comes with 260 hp (200 kW) rated capacity, a wide selection of input and output voltage 110V/ 230V/ 380V/ 480V/ 690V (-15%~+20%). High performance AC variable frequency drive for 3 phase used in electro-mechanical drive systems to control motor speed and torque by varying motor input frequency.
|Rated Capacity||260 hp (200 kW)|
|Rated Input Current||385A (for 380V)|
|Rated Output Current||377A (for 380V)|
|Applicable Motor Output||160 kW|
|Power||Input Rated Voltage*||220V/230V/380V/480V/690V (-15%~+20%)
|Output Rated Voltage*||220V/230V/380V/480V/690V (-15%~+20%)
|Rubust Design||IGBT current > 2 times of inverter output current, Capacitor > 50uF/A|
|PCB aging test||100% test, 50°C, 12 hours.|
|Finished products aging test||100% test, 50°C, 24 hours.|
|Control Feature||Control System||VF Control / Open Sensor Vector Control / Closed loop Vector (PG card)|
|Output Frequency Resolution||0.1Hz|
|Torque Characteristics||Including the auto-torque, auto-slip compensation, starting torque can be 0.5 Hz/150% (V/f), 1 Hz/150% (SVC),0 Hz/180% (FVC)|
|Overload Endurance||150% / 120s, 160% / 60s, 180% / 10s, 200% / 1s|
|Accel / Decel Time||0.1~65000s. (can be set individually)|
|Torque Boost||Automatically torque boost, manually torque boost: 0.1%~30.0%|
|Stall Prevention Level||20~200%, setting of Rated Current|
|Operating Feature||Input / Output Terminals||Keypad||Removable|
|Input terminals||6 multifunctional inputs, one can be work as high speed pulse Input.
3 programmable analog input: AI1, AI2, AI3: 0~10V / 4~20mA.
|Output terminals||2 Groups relay outputs, 1 open collector outputs.
2 Analog outputs, 0~10V / 4~20mA.
|Communication Terminals||Build-in standard RS485 communication interface. MODBUS-RTU communication protocol.|
|Built-in PID||Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature,flow, etc.)|
|Jog Operation||Jog operation frequency: 0.0Hz~maximum frequency. Jog acceleration/deceleration time: 0.1s~3600.0s.|
|Other Function||AVR, S-curve, Over-Voltage Stall Prevention, DC Braking, Fault Records, Adjustable Carried Frequency, Starting Frequency Setting of DC Braking, Over-Current Stall Prevention, Momentary Power Loss Restart, Reverse Inhibition, Frequency Limits, Parameter Lock/Reset.|
|Protection||Over Voltage, Over Current, Under Voltage, Overload, Electronic thermal, Overheating, Self-testing.|
|Others||Including EMC Filter (C2/C3 Standard)|
|Installation||Altitude 1,000 m or below, keep from corrosive gasses, liquid and dust.|
|Ambient Temp||-10°C~+40°C (Non-Condensing and not frozen)|
|Ambient Humidity||Below 90% RH (non-condensing)|
|Vibration||9.80665m/s2 (1G) less than 20Hz, 5.88m/s2 (0.6Gat) 20 to 50Hz|