





- Stock: In Stock
- Model: PEACO-C300VA
- SKU: PEACO-TT-300VA
Available Options
300VA toroidal transformer for sale, 110V/120V/220V/240V AC primary voltages, secondary voltages ranges from 2 x 6VAC to 2 x 115VAC. Twin secondary windings can be connected in series or parallel or used independently. 100% electrical and flash tested. Widely used in industrial, power management. Good toroidal transformer price and high quality. Custom toroidal transformers are also available.
Features
- High temperature resistance up to 130℃. High polymer PET polyester film, good insulation performance.
- High silicon toroidal transformer core with full copper wire windings, smooth and flat with small gap, longer service life.
- Double insulated enameled wire winding, standardized winding process and welding level.
- QZ-2 industrial copper wire, double insulation, high mechanical strength, low operating noise, little interference, high stability.
- Energy-conserving, smaller no-load standby losses, higher energy conversion efficiency up to 96%.
- Normal working at -30℃. No high frequency electromagnetic radiation.
- The toroidal power transformer is widely used in medical equipment, automatic control equipment, home appliance speaker equipment, security monitoring equipment, broadcasting system, solar wind energy, electronic communication, etc.
Specification
Model | PEACO-C300VA |
Rated power | 500VA (Max.) |
Input voltage* | 110V, 120V, 220V, 230V, 240V |
Output voltage* | 2x6V, 2X12V, 2X15V, 2X24V, 2X30V, 2X35V, 2X40V, 2X50V, 2X115V, 12V, 24V, 48V, 110V, 220V |
Rated current | 12.5A (Max.) |
Rated frequency | 50Hz/60Hz |
No-load loss | <4W |
Voltage strength | PRI-SEC: DC2500V |
Insulation impedance | PRI-SEC: ≥500MΩ |
Input lead | UL1672-18# RED RED |
Output lead | UL1015-16# BLK BLK |
Net weight | 3 kg |
Product dimension | 120*46*56mm |
Mounting plate | 120*120mm (Standard) |
Hole distance | 110*110mm |
Pore size | 5*8mm |
Base Type* | Stoving varnish (Standard), galvanization (Optional) |
Certification | CE, RoHS, CQC, UL |
- * denotes optional or customized parameters and you can select every parameter in drop-down lists to complete your order.
- Magnetic shield, electrostatic shield and central hole filled with epoxy resin can be customized for your needs if needed.
Toroidal Transformer Winding
Toroidal Transformer Mounting & Accessories
Toroidal Transformer Packaging
KNOWLEDGE BASE --- Operating Environment of Toroidal Transformer
Toroidal transformer can be used normally in the environment of the ambient air temperature -30°C to +40°C and the average value of 24 hours does not exceed +35°C. When it exceeds +40°C, the load capacity of the toroidal power transformer decreases. On the countrary, when it is below 0°C, the load capacity of the transformer increases and the load power can slightly exceed rated power. The -30°C low temperature environment does not affect the normal startup and normal operation of the toroidal transformer, Additionally, the good low temperature features are the advantages of the toroidal power transformer.
Toroidal transformers currently have no requirements on the altitude of the installation site.
It is recommended that the surrounding air humidity should not exceed 90% and the monthly average humidity should not exceed 75%. In a high humidity environment, it is a good suggestion to use a waterproof toroidal transformer. The protection level of Peaco Support waterproof transformer is up to IP67 and it can still work for a long time when immersed in water.