Rotary Torque Sensor, Shaft to Shaft, 5 Nm-10000 Nm

• The rotary torque sensor features dynamic measurement of torque and speed, non-contact transmission of power supply and signals and digitization of output signals.
• High testing precision, good stability and strong anti-interference for the shaft to shaft rotary torque sensor are available.
• The forward and reverse torque can be continuously measured without repeating zero setting.
• Rotary torque transducer can measure both static torque and dynamic torque.
• Reliable torque transducer can be used independently from the secondary instrument, and the output signal can be used directly by PLC and PC.
• The shaft to shaft rotary torque sensor can be customized according to customer requirements.

• Model: PEACO-ZJ-A
• Capacity: 5 Nm-10000 Nm. 5 Nm, 10 Nm, 20 Nm, 30 Nm, 50 Nm, 100 Nm, 200 Nm, 500 Nm, 1000 Nm, 2000Nm, 5000Nm, 10000Nm (Optional)
• Torque indication error: < ±0.2% F.S
• Power supply voltage: DC 15V±5%, DC 24V (optional)
• Sensitivity: 1±0.2 mv/V
• Speed output signal: 60-2000 pulse /turn (optional)
• Nonlinear: ≤ ±0.2% F.S
• Zero torque frequency output: 10KHz
• Repeatability: ≤ ±0.2% F.S
• Positive torque full scale frequency output: 15KHz
• Lag: ≤ 0.2 F.S
• Reverse torque full scale frequency output: 5KHz
• Zero drift (24 hours) : ≤ 0.1% F.S
• Signal duty ratio: (50±10) %
• Output impedance: 1ΚΩ±3Ω
• Power consumption of the sensor: 4W
• Insulation resistance: >500MΩ
• Temperature while using: -20℃~+70℃
• Static overload: 150%
• Relative humidity: ≤ 90% RH
• Breaking load: 200%
• Signal output: 10±5KHz (Optional 4-20mA, 0-5V, 0-10V signal output / RS485)
• Measurement range: 5-1000N.m (customizable)
• Warranty: 12 months

Plug Connection and Lead Definition

Torque Sensor Installation Dimension (unit: mm)