Hot
1200W Pure Sine Wave Inverter, DC 12 Volt to 240 Volt AC
- Stock: In Stock
- Model: PP-1200-B
- SKU: PEACO-Inverter-12C
$398.00
Ex Tax: $398.00
PEACO Support power inverter with digital display, 1200 watt continuous power & 2400 watt surge power, once installed onto your 12V/ 24V/ 48V system, you get the use of socket providing 110V/ 220V/ 230V/ 240V AC power for running your electrical appliances. 12 volt to 220 volt inverter with cheap price, compact and lightweight.
Specification
- Model: PP-1200-B
- Rated Power: 1200W
- Peak Power: 2400W
- Output Voltage: 100VAC/ 110V AC/ 120V AC/ 220V AC/ 230V AC/ 240V AC±5%
- Output Frequency: 50Hz±0.5Hz / 60Hz±0.5Hz
- Output Waveform: Pure sine wave
- Waveform Distortion: THD<3% (Linear load)
- USB Port: 5V, 1A
- Max. Efficiency: 90%
- Working Temperature: -10℃-+50℃
- Storage Temperature: -30℃-+70℃
- Dimension (L*W*H): 296*180*78mm
- Packing (L*W*H): 360*335*100mm
- Optional Accessories: Wired/ wireless remote control, crocodile clip/ cigarette lighter plug.
- Package Included: 1200W pure sine wave inverter*1+ inverter cables*1+ inverter user manual*1
- Net / Gross Weight: 2760g / 3230g
- Configuration: Standard type
- Cooling Method: Intelligent air cooling
- Certification: CE, RoSH
- Warranty: 12 months
| Input Voltage (Optional) | DC12V | DC24V | DC48V |
| Unload Current Less Than | 0.8A | 0.5A | 0.3A |
| Input Voltage Range | 10.0-15.5V | 20.0-31.0V | 40.0-61.0V |
| Low Voltage Alarm | 10.5±0.5V | 21.0±0.5V | 42.0±1.0V |
| Low Voltage Protection | 10.0±0.5V | 20.0±0.5V | 40.0-15.0V |
| Over Voltage Protection | 15.5±0.5V | 31.0±0.5V | 61.0±1.0V |
| Low Voltage Recover | 12.3±0.5V | 24.0±0.5V | 48.0±1.0V |
| Over Voltage Recover | 14.8±0.5V | 29.5±0.5V | 59.0±1.0V |
Low Voltage: Alarm first, voltage continuously reduce, LED red light on & shut down.
Over Voltage: LED red light on, shut down.
Over Load: LED red light on, shut down.
Over Temperature: Alarm first, temperature continuously rises, LED red light on & shut down.
Short Circuit: LED red light on.
Input Reverse Polarity: Fuse burn-out.
Pure Sine Wave Inverter Alarms and Protection Functions
1200W Pure Sine Wave Inverter Output Sockets (Optional)
KNOWLEDGE BASE --- Pure Sine Wave Inverter Troubleshooting (Ⅱ)
1. Inverter alarm.
① Under-voltage alarm.
The input voltage is too low. The battery needs to be charged or replaced.
② Over-voltage alarm.
The input voltage is too high, the appropriate input voltage should be replaced.
③ Over-heat alarm.
Put the inverter in a ventilated place to cool down for 15 minutes.
④ Over-load alarm.
Turn off the load or use home appliances whose power is less than the power of the inverter.
2. The battery life is too short.
① Electrical appliances consume a lot of power.
Replace the battery with large capacity.
② The battery is bad or damaged.
Replace the battery.
③ The battery is not charged enough.
Replace the battery or charge the battery.
④ The wire attenuates the voltage.
Shorten the wire or use a thicker wire.
3. The inverter can only drive small power loads.
① The voltage attenuates when the current flows through the wire.
Shorten the wire or use a thicker wire.
