Hot
600W Pure Sine Power Inverter, DC 12 Volt to 220 Volt AC
- Stock: In Stock
- Model: PP-600-C
- SKU: PEACO-Inverter-6C
$272.99
Ex Tax: $272.99
600W pure sine wave inverter with good price, 12V/ 24V/ 48V DC to 110V/ 220V/ 240V AC, 600 watt continuous and 1200 watt surge power with pure sine wave output. Intelligent air cooling and multiple levels of protections, LED indicator, USB port, single AC outlet are available.
Specification
- Model: PP-600-C
- Rated Power: 600W
- Peak Power: 1200W
- Output Voltage: 100V AC/ 110V AC/ 120V AC/ 220V AC/ 230V AC/ 240V AC±5%
- Output Frequency: 50Hz±0.5Hz / 60Hz±0.5Hz
- Output Waveform: Pure sine wave
- Waveform Distortion: THD<3% (Linear load)
- USB Port: 5V 1A
- Max. Efficiency: 90%
- Working Temperature: -10℃-+50℃
- Storage Temperature: -30℃-+70℃
- Optional Accessories: Wired/ wireless remote control, crocodile clip/ cigarette lighter plug.
- Package Included: 600W pure sine wave inverter*1+ inverter cables*1+inverter user manual*1
- Dimension: 250*106*63mm
- Packing: 295*160*80mm
- Net / Gross Weight: 961g / 1245g
- Configuration: Standard type
- Cooling Method: Intelligent air cooling
- Certification: CE, RoSH
- Warranty: 24 months
| Input Voltage (Optional) | DC12V | DC24V | DC48V |
| Unload Current Less Than | 0.6A | 0.4A | 0.3A |
| Input Voltage Range | 10.0-15.5V | 20.0-31.0V | 40.0-61.0V |
| Low Voltage Alarm | 10.5±0.5V | 21.0±0.5V | 42.0±1.0V |
| Low Voltage Protection | 10.0±0.5V | 20.0±0.5V | 40.0-15.0V |
| Over Voltage Protection | 15.5±0.5V | 31.0±0.5V | 61.0±1.0V |
| Low Voltage Recover | 12.3±0.5V | 24.0±0.5V | 48.0±1.0V |
| Over Voltage Recover | 14.8±0.5V | 29.5±0.5V | 59.0±1.0V |
Protect Function
Low Voltage: Alarm first, voltage continuously reduce, LED red light on & shut down.
Over Voltage: LED red light on, shut down.
Over Load: LED red light on, shut down.
Over Temperature: Alarm first, temperature continuously rises, LED red light on & shut down.
Short Circuit: LED red light on.
Input Reverse Polarity: Fuse burn-out.
600W Pure Sine Power Inverter Output Sockets (Optional)
KNOWLEDGE BASE --- Functions of Pure Sine Wave Inverter (I)
- Inverter output function. After turning on the SWITCH on the front panel, the 12 volt to 220 volt inverter converts the DC power of the battery into pure sine wave AC power, which is output by the "AC OUTPUT" on the other panel.
- Automatic voltage stabilization function. When the battery voltage fluctuates between the undervoltage point and the overvoltage point and the load changes within the rated power, the pure sine wave inverter can automatically stabilize the output.
- Over-voltage protection function. When the battery voltage is greater than the "overvoltage point", the inverter will automatically cut off the inverter output, the front panel LED displays "overvoltage", and the buzzer will sound for ten seconds. When the voltage drops to the "overvoltage recovery point", the inverter resumes work.
- Low-voltage protection function. When the battery voltage is lower than the "undervoltage point", the inverter will automatically cut off the inverter output in order to avoid over-discharge and damage the battery. Meanwhile, the front panel LED displays "undervoltage" and the buzzer gives out an alarm sound for ten seconds. When the voltage rises to the "undervoltage recovery point", the inverter resumes work.
