90W AC Gear Motor, Single Phase, Speed Controller
- Stock: In Stock
- Model: PEACO-5IK90RGU
- SKU: PEACO-5IK90RGU
$379.57
Ex Tax: $379.57
90W 90mm AC gear motor runs easily wth speed controller, single phase 110V to 230V voltages, 50Hz/ 60Hz frequency, spped control range up to 90-1700 r/min. High torque electric motor for providing ample torque to help operate medical tables, jacks, lifts and robotics.
Specification
| Model | 5IK90RGU-AFJ (A) | 5IK90RGU-EFJ (B) | 5IK90RGU-CFE (C) | 5IK90RGU-HFE (D) | |||||
| Output Power, Phase | 90W, Single phase | ||||||||
| Certification | CE | ||||||||
| Shaft Type* | Pinion shaft, round shaft | ||||||||
| Voltage* | 100V | 110V | 120V | 220V | 230V | 220V | 230V | ||
| Frequency | 50Hz | 60Hz | 60Hz | 50Hz | 60Hz | ||||
| Current | 0.75A | 0.75A | 0.35A | 0.33A | |||||
| Speed Control Range | 90-1400r/min | 90-1700r/min | 90-1700r/min | 90-1700r/min | 90-1400r/min | 90-1400r/min | 90-1700r/min | 90-1700r/min | |
| Allowance Torque | 1200r/min | 710mN.m | 710mN.m | 710mN.m | 710mN.m | 710mN.m | |||
| 90r/min | 230mN.m, 260mN.m | 260mN.m | 230mN.m | 260mN.m | |||||
| Starting Torque | 405mN.m | 410mN.m | 410mN.m | 410mN.m | 410mN.m | ||||
| Capacitor | 2.75μF | 2.6μF | 1.2μF | 1.25μF | |||||
| Weight | Motor: 3.3 kg, gearhead: 1.5 kg, decimal gearhead: 0.65 kg | ||||||||
| Gearhead Model | 5GU□K (Optional decimal gearhead model: 5GU10XK) | ||||||||
| Gear Ratio | 3, 3.6, 5, 6, 7.5, 9, 12.5, 15, 18, 25, 30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200 Enter the gear ratio into the box (□) within the model name. |
||||||||
Allowance Torque with Reducer for ABCD Type Gear Motor [Unit: Speed (r/min) / Upside (N.m) / Belowside (kgf.cm)]
| Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Speed (50Hz) | 500 | 417 | 300 | 250 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 | 7.5 |
| Speed (60Hz) | 600 | 600 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 |
| 50Hz | 1.7 | 20 | 2.8 | 3.4 | 4.3 | 5.1 | 6.4 | 7.7 | 9.2 | 11.6 | 13.6 | 16.6 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| 50Hz | 17.3 | 20.4 | 28.6 | 34.7 | 43.9 | 52 | 65.3 | 78.6 | 93.3 | 118 | 139 | 169 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
| 60Hz | 14 | 1.7 | 2.5 | 2.8 | 3.5 | 4.2 | 5.2 | 6.2 | 7.5 | 9.4 | 11.3 | 13.5 | 18.8 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| 60Hz | 14.3 | 17.3 | 25.5 | 28.6 | 35.7 | 42.9 | 53.1 | 63.3 | 76.5 | 95.5 | 115 | 138 | 19.2 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Note:
- The allowance torque values with green background indicates the same rotating direction of the motor while the others rotate in the opposite direction.
- The speed is calculated by dividing the motor's synchronous speed (50Hz: 1500r/min, 60Hz: 1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value, depending on the size of the load.
- To reduce the speed beyond the gear ratio in the table, installing a decimal gearhead (gear ratio: 10) between the gearhead and motor is recommended and in this case, the allowable torque is 20N.m.
Dimensions (Unit: mm)
Note:
- The key is included with the gearhead.
- Motor shape are the same as those of the pinion shaft except weight and the shaft section.
- Decimal gearhead (type: 5GU10XK) is optional for customers and can be connected to GU pinion shaft type motor.
Speed Controller Dimension (Unit: mm)
Connection Diagram
