120W AC Gear Motor, 1-Phase, 104mm, Speed Control
- Stock: In Stock
- Model: PEACO-6IK120RGU-AFJ
- SKU: PEACO-6IK120RGU-AFJ
$418.69
Ex Tax: $418.69
PEACO SUPPORT single phase gear motor comes with 120W AC output power, 104x104mm frame size, 110V, 220V, 230V voltages, clock wise and counter clock wise rotation available. Combined with high strength gear, pure copper coils, top quality geared motor for speed control to operate at lower speed to exert greater power.
Specification
| Model | 6IK120RGU-AFJ (A) | 6IK120RGU-EFJ (B) | 6IK120RGU-CFE (C) | 6IK120RGU-HFE (D) | |||||
| Output Power, Phase | 120W, Single phase | ||||||||
| Certification | CE | ||||||||
| Shaft Type* | Pinion shaft, round shaft | ||||||||
| Voltage* | 100V | 110V | 120V | 220V | 230V | 220V | 230V | ||
| Frequency | 50Hz | 60Hz | 60Hz | 50Hz | 60Hz | ||||
| Current | 3.65A | 3.3A | 1.55A | 1.65A | |||||
| Speed Control Range | 90-1400r/min | 90-1700r/min | 90-1700r/min | 90-1700r/min | 90-1400r/min | 90-1400r/min | 90-1700r/min | 90-1700r/min | |
| Allowance Torque | 1200r/min | 750mN.m | 750mN.m | 750mN.m | 750mN.m | 750mN.m | |||
| 90r/min | 47mN.m | 360mN.m | 360mN.m | 360mN.m | |||||
| Starting Torque | 530mN.m | 520mN.m | 530mN.m | 530mN.m | 530mN.m | ||||
| Capacitor | 30μF | 20μF | 8μF | 8μF | |||||
| Weight | Motor: 4.9 kg, Gearhead: 2.1 kg, decimal gearhead: 0.65 kg | ||||||||
| Gearhead Model | 6GU□K | ||||||||
| Gear Ratio | 3, 3.6, 5, 6, 7.5, 9, 12.5, 15, 18, 25, 30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200 Enter the gear ratio into the box (□) within the model name. |
||||||||
Allowance Torque with Reducer for ABCD Type Gear Motor [Unit: Speed (r/min) / Upside (N.m) / Belowside (kgf.cm)]
| Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Speed (50Hz) | 500 | 417 | 300 | 250 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 | 7.5 |
| Speed (60Hz) | 600 | 600 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 |
| 50Hz | 2.3 | 2.7 | 3.8 | 4.5 | 5.6 | 6.8 | 8.5 | 10.2 | 12.2 | 15.3 | 18.4 | 22.1 | 30.7 | 36.8 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| 50Hz | 23.4 | 27.5 | 38.7 | 45.9 | 57.1 | 69.3 | 86.7 | 104 | 124 | 156 | 187 | 225 | 313 | 375 | 400 | 400 | 400 | 400 | 400 | 400 | 400 |
| 60Hz | 1.8 | 2.2 | 3 | 3.6 | 4.6 | 5.5 | 6.8 | 8.2 | 9.8 | 12.4 | 14.9 | 17.8 | 24.8 | 29.7 | 37.1 | 40 | 40 | 40 | 40 | 40 | 40 |
| 60Hz | 18.3 | 22.4 | 30.6 | 36.7 | 46.9 | 56.1 | 69.3 | 83.6 | 100 | 126 | 152 | 181 | 253 | 303 | 378 | 400 | 400 | 400 | 400 | 400 | 400 |
Note:
- The allowance torque values without yellow background indicates the same rotating direction of the motor while the others rotate in the opposite direction.
- The speed is calculated by dividing the motor's synchronous speed (50Hz: 1500r/min, 60Hz: 1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value, depending on the size of the load.
- To reduce the speed beyond the gear ratio in the table, installing a decimal gearhead (gear ratio: 10) between the gearhead and motor is recommended and in this case, the allowable torque is 20N.m.
Dimensions (Unit: mm)
Speed Controller Dimension (Unit: mm)
Connection Diagram
KNOWLEDGE BASE --- Relationship of AC motor Frequency and Speed
1. The stator magnetic field with the same frequency speed
n1=60 f/p (r/min)
n= Speed of motor (RPM)
f= Electrical frequency of motor
p=No. of poles of motor
2. Motor rated slip
S=(n1-n)/n*100%
n=motor rated speed (r/min)
Note: The rated speed of the motor is lower than the speed of the stator magnetic field so that the position difference and the relative displacement can be produced.
3. Motor rated speed
n=(1-s)*n=(1-s)* 60 f/p (r/min)
