4 kW spindle provides contant torque, working speed up to 18,000rpm, 2.12Nm torque is available and is a kind of water cooled spindle motor. 220V/ 380V CNC spindle motor is optional for your engraving and milling machines. Packed with wooden box, safe and fast delivery for your use.
- Model: PEACO-GDK110-18Z/4.0
- Material: Stainless steel, copper, aluminum
- Power: 4.0 kW
- Torque: 2.12Nm
- Voltage: 220V / 380V
- Current: 14.0 A / 8.0 A
- Frequency: 300Hz
- Speed: 18,000 RPM
- Cooling: Water-cooled
- Bearing Lubrication: Grease
- Number of Pole: 2 poles
- Joint of Nose: ER25 collet (Φ3.175 mm-Φ16.0 mm)
- Bearings Type: 7007C (P4)*2, 7004C (P4)*2
- Dimension: ØD=110mm, ØD1=85mm, L=352.5mm, L1=30mm, L2=62.5mm
- Rotating Mode: anticlockwise from the shaft extension end.
- Net Weight: 16kg
- Gross Weight: 21kg (packed with wooden box)
- Certification: CE
- Warranty: 1 year
Spindle Motor Dimension (Unit: mm)
Spindle Motor Wiring
1. The electric main shaft shall be installed at the clamped position, otherwise the bearing will be easily damaged.
2. The compressed air shall be dry and clean and the filtering accuracy shall be 0.1 micron. Atmospheric pressure is 0.1- 0.2 MPa and the air seal shall be normally open. It is recommended to use the two-level filtration with the filtration accuracy of 0.5 micron / 0.1 micron respectively and the air filter shall have automatic discharge device.