40W AC Gear Motor, Single Phase, Speed Controller
- Stock: In Stock
- Model: PEACO-5IK40RGN
- SKU: PEACO-5IK40RGN
$288.49
Ex Tax: $288.49
25W AC gear motor with speed controller to change motor speed and torque for particular applications. Optional single phase 110V to 230V voltages, 50Hz/ 60Hz frequency, pinion shaft/ round shaft, 3:1, 5:1, 25:1, 100:1, 200:1 gear ratio. Quality AC motor with full copper coils, stable and reliable running, low temperature rise, low noise, high torque.
Specification
| Model | 5IK40RGN-AJ (A) | 5IK40RGN-EJ (B) | 5IK40RGN-CE (C) | 5IK40RGN-HE (D) | |||||
| Output Power, Phase | 40W, Single phase | ||||||||
| Certification | CE | ||||||||
| Shaft Type* | Pinion shaft, round shaft | ||||||||
| Voltage* | 100V | 110V | 120V | 220V | 230V | 220V | 230V | ||
| Frequency | 50Hz | 60Hz | 60Hz | 50Hz | 60Hz | ||||
| Current | 0.95A | 1.05A | 0.55A | 0.55A | |||||
| Speed Control Range | 90-1400r/min | 90-1700r/min | 90-1700r/min | 90-1700r/min | 90-1400r/min | 90-1400r/min | 90-1700r/min | 90-1700r/min | |
| Allowance Torque | 1200r/min | 260mN.m | 260mN.m | 300mN.m | 230mN.m | 230mN.m | |||
| 90r/min | 70mN.m | 65mN.m | 75mN.m | 70mN.m | |||||
| Starting Torque | 180mN.m | 180mN.m | 160mN.m | 145mN.m | 145mN.m | ||||
| Capacitor | 8μF | 7μF | 1.5μF | 1.5μF | |||||
| Weight | Motor: 2.5 kg, gearhead: 1.35 kg, decimal gearhead: 0.6 kg | ||||||||
| Gearhead Model | 5GN□K | ||||||||
| Gear Ratio | 3, 3.6, 5, 6, 7.5, 9, 12.5, 15, 18, 25, 30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200 Enter the gear ratio into the box (□) within the model name. |
||||||||
Allowance Torque with Reducer for ABCD Type Gear Motor [Unit: Speed (r/min) / Upside (N.m) / Belowside (kgf.cm)]
| Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Speed (50Hz) | 500 | 417 | 300 | 250 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 | 7.5 |
| Speed (60Hz) | 600 | 600 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 |
| 50Hz | 0.77 | 0.92 | 1.3 | 1.5 | 1.9 | 2.3 | 3.2 | 3.8 | 4.6 | 5.7 | 6.9 | 8.3 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| 50Hz | 7.85 | 9.38 | 13.2 | 15.3 | 19.4 | 23.4 | 32.6 | 38.7 | 46.9 | 58.1 | 70.4 | 84.7 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| 60Hz | 0.62 | 0.76 | 1.1 | 1.3 | 1.6 | 1.9 | 2.6 | 3.2 | 3.8 | 4.7 | 5.7 | 6.8 | 8.6 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| 60Hz | 6.42 | 7.75 | 11.2 | 13.2 | 16.3 | 19.3 | 26.5 | 32.6 | 38.7 | 47.9 | 58.1 | 69.3 | 87.7 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
Note:
- The allowance torque values without yellow background indicates the same rotating direction of the motor while the others rotate in the opposite direction.
- The speed is calculated by dividing the motor's synchronous speed (50Hz: 1500r/min, 60Hz: 1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value, depending on the size of the load.
- To reduce the speed beyond the gear ratio in the table, installing a decimal gearhead (gear ratio: 10) between the gearhead and motor is recommended and in this case, the allowable torque is 10N.m.
Dimensions (Unit: mm)
Speed Controller Dimension (Unit: mm)
Connection Diagram
