48V 4.2A AC-DC Switching Power Supply 200W
- Stock: In Stock
- Model: PEACO-S-201-48
- SKU: PEACO-SMPS-201-48
$164.37
Ex Tax: $164.37
48V 4.2A AC-DC switching power supply works at 200W power, converting full range of AC to DC. AC 110V/220V to DC 0-48V. High performance SMPS power supply with full functions can be used as a 5V 12V 24V 30V 36V 48V power supply for RV, car, laptop, computer, CCTV, ham radio, etc.
Features
- AC input range can be selectable with switch.
- AC to DC switching power supply comes with short circuit, overload, over voltage, over temperature protections.
- Switching power supply featues natural cooling, 100% full load burn-in test for reliable use.
- Fixed switching frequency is at 25KHz.
- Low cost, high reliability. 1 year warranty is available.
48V SMPS Power Supply Specification
| Model | PEACO-S-201-48 | |
| Output | DC Voltage | 48V |
| Rated Current | 4.2A | |
| Current Range | 0~4.2A | |
| Rated Power | 201.6W | |
| Ripple & Noise （Max.） | 240mVp-p | |
| Voltage Adjustment Range | 41~56V | |
| Voltage Tolerance | ±1.0% | |
| Line Regulation | ±0.5% | |
| Load Regulation | ±0.5% | |
| Setup, Rise, Hold Time | 200ms, 100ms at full load. | |
| Input | Voltage Range | 90~132V AC / 180~264V AC by switch, 255~370V DC |
| Frequency Range | 47~63Hz | |
| Efficiency | 84% | |
| AC Current | 3.6A/115V AC, 2A/230V AC | |
| Inrush Current (Max.) | 45A/115V AC, 45A/230V AC | |
| Leakage Current | ＜3.5mA/240V AC | |
| Protection | Over Load | 105~135% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed. | ||
| Over Voltage | 57.6~67.2V | |
| Protection type : Shut down o/p voltage, re-power on to recover. | ||
| Over Temperature | ≥ 90℃ (RTH3) detect on inside ambient temperature. | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. | ||
| Environment | Working Temperature | -10 ~ +50℃ (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing | |
| Storage Temperature & Humidity | -20 ~ +85℃, 10 ~ 95% RH | |
| Temperature Coefficient | +0.03%/℃ (0~50℃) | |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
| Safety & EMC | Safety Standard | Design refer to UL1012 |
| Withstand Volatge | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
| EMI Conduction & Radiation | Design refer to FCC Part15 J Conduction Class A | |
| Others | MTBF | 271.9K hrs min. MIL-HDBK-217F (25℃) |
| Dimension | 215*115*50mm (L*W*H) | |
| Weight | 0.93kg | |
| Note | 1. All parameters are measured at 230V AC input, rated load and 25℃ of ambient temperature if they are NOT specially mentioned. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance includes set up tolerance, line regulation and load regulation. |
|
SMPS Power Supply Details
SMPS Power Supply Dimension (Unit: mm)
Switching Power Supply Diagram
KNOWLEDGE BASE ---
