



- Stock: In Stock
- Model: PEACO-C-2000M9
- SKU: PEACO-UPS-2k
Available Options
Buy uninterruptible power supply from Peaco Support. 2 kVA high power UPS for computer comes with simulated sine wave, automatic adjustment of electric boosting and step-down, stable output voltage. 120V UPS power supply, 240V backup power supply available. Best backup power supply for PC, printer, etc.
Features
1. Wide range of voltage/frequency input.
- UPS backup power supply for home has automatic on-line voltage stabilization and input voltage ranges from 81V to 145V AC or 162V to 290V AC, which effectively reduces the battery usage rate, thereby extending the battery life, especially suitable for areas where there are large power grid fluctuations and poor power environment. High performance backup power supply for desktop computer.
2. Excellent microprocessor ensures reliable operation.
- The backup power supply for TV adopts advanced microcomputer (CPU) control technology, faster and more accurate data processing and control.
- With interactive design, the UPS system uses AC to DC to charge the battery and ensures that the built-in battery has enough energy during running.
- Advanced Hall devices and high quality components are adopted in UPS to provide users with a reliable power supply.
3. Intelligent no-load automatic on and off technology.
- When the utility power is supplied, the UPS will automatically turn on and the battery will be charged at the same time.
- The system will automatically detect the load when the domestic UPS power supply is in the shutdown state and power failure. If the load is less than 5%, the UPS will be in no-load state and automatically shut down after 1 minute to reduce loss and effectively extend the battery lifespan.
Specification
Model | PEACO-C-2000M9 | |
Capacity | 2000VA (1200W) | |
Input | Voltage | 110V/120V AC or 220V/230V/240V AC |
Voltage Range | 81V-145V AC / 162V-290V AC | |
Frequency Range | 50Hz/60Hz (Auto) | |
Output | Voltage | 110V/120V AC or 220V/230V/240V AC |
AC Voltage Regulation (Batt. Mode) | ±10% | |
Frequency Range (Batt. Mode) | 50Hz/60Hz±1Hz | |
Transfer Time | Typical 2-6 ms. max. 10ms | |
Waveform (Batt. Mode) | Simulated sine wave | |
Battery | Battery Type | 12V/9.0Ah*2 |
Typical Recharge Time | 4~6 hours recover to 90% capacity | |
Protection | Full Protection | Overload, discharge and overcharge protection |
LCD Model | AC mode, battery mode, load level, battery level, input voltage, output voltage, overload, fault and low battery. | |
LED Model | AC Mode | Green lighting. |
Battery Mode | Yellow flashing. | |
Fault | Red lighting. | |
Alarm | Battery Mode | Sounds every 10 seconds |
Low Battery | Sounds every seconds | |
Overload | Sounds every 0.5 seconds | |
Battery Replacement Alarm | Sounds every 2 seconds | |
Fault | Sounds continuously | |
Physics | Dimension (D*W*H) | 287*100*142mm |
Net Weight | 11.5kg | |
Environment | Humidity | 0-90% RH at 0-40℃ (Non-condensing) |
Noise Level | Less than 40dB | |
Optional USB/RS-232 Port | Supports Windows® 2000/2003/XP/Vista/2008, Windows2 7/8, Linux, Unix and MAC | |
Certification, Warranty | CE, ISO, 1 year |
KNOWLEDGE BASE --- What is UPS?
UPS is short for Uninterruptible Power Supply, which is a kind of uninterruptible power supply containing energy storage device. It is widely used to provide uninterruptible power supply for some equipment with high requirements for power stability. When the mains input is normal, the UPS will stabilize the mains and supply the load. At this time, the UPS is an AC voltage stabilizer and at the same time UPS charges the battery in housing. When the mains power interruption (accidental power failure) occurs, the backup power unit UPS will immediately continue to supply 220V AC power to the load with battery DC energy through the inverter switching conversion method, so as to make the load maintain normal work and protect the load from any damage. Uninterruptible power supply (UPS) usually provides protection against over-voltage or under-voltage and is also used as backup power supply for server.