- Stock: In Stock
- Model: PEACO-HNSCR-LA
- SKU: PEACO-HNSCR-LA
Features
1. The thyristor power regulator adopts multipurpose LED indication for working condition, has good quality, and a longer service life.
2. Excellent stability performance, heat dissipation, and high precision.
3. A 3-phase SCR power regulator features automatic protective functions and a built-in fast fuse.
4. Precise temperature control, high efficiency, convenience for installation, and connection can be achieved.
5. The power regulator SCR is suitable only for resistive loads such as heaters, bulbs, tubes, ovens, furnaces, etc.
6. The PCB control board of the power regulator adopts SMT production, with a separate control method, withstanding voltage, current resistance, maintenance, and no interference.
Specification
| Model | PEACO-HNSCR-LA |
| Rated Voltage | Three-phase 380VAC ±15% (three-phase three-wire) |
| Rated Current* | 75A, 90A |
| Dimension (W*L*H) | 140*200*150mm |
| Installation Dimension (W*L) | 130*170mm |
| Auxiliary Power | 220V, 50Hz/60Hz |
| Output Mode | Phase output |
| Control Signal* | 4-20mA, 0-5V DC, 0-10V DC |
| Protection Function | Fast fuse |
| Environment | ＜45℃ |
| Humidity | ＜90% RH |
| Certification | CE |
| Weight | 4kg-6kg |
Automatic Adjustment
Phase Control
Warming
1. The main circuit adopts a three-phase three-wire input without any phase sequence.
2. For the Y connection load, the center of Y should not be connected with the zero line, otherwise, the SCR power regulator will lose control.
3. The 3-phase SCR power regulator has an in-build fuse for overcurrent and short-circuit protection. When the fuse is blown because of the over current, please replace another one with the same specification as the older one, do not use the one with larger fuse amperes.
4. The SCR power regulator is a product with massive current, please note that terminals (R.S.T) and (U.V.W) shall not be locked tightly, otherwise, the SCR power regulator will be burned by terminal heating.
