250 hp (185KW) Soft Starter, w/ Built-in Contactor, 380V/440V
- Stock: In Stock
- Model: PEACO-ZJR2-B31850
- SKU: PEACO-SSBBC16
$2,054.95
Ex Tax: $2,054.95
250 hp (185 kW) soft starter with a built-in contactor, 370A at 380V, three-phase 220V, 380V, 440V, 480V, etc. High performance, factory price, fast & free delivery. Cost-efficient motor control to reduce starting current and cost of distribution equipment.
Soft Starter User Manual: Peaco Support soft starter user manual.pdf
Features
- This series soft starter comes with a built-in contactor and provides 3 relays inside. There is no need to add an external contractor.
- The soft starter with a built-in contactor can work with a three-phase AC motor and protect the motor from excessive current generated during the acceleration of large torque at the starting of the motor.
- 16 SCM control and intelligent digital display are available with the motor soft starter.
- High-performance soft starters can control multiple motors.
- Effective soft starter with starting modes: current limiting start, voltage ramp start, kick start + current-limiting start, kick start + voltage ramp start, current ramp start, voltage current-limiting double closed-loop start.
- Reliable soft starter features free stop and soft stop. The stop time can be selected freely from 0 to 60 seconds.
- With full protection functions, overcurrent, overload, overheat, low voltage, high voltage, load short circuit, phase loss, phase loss, instantaneous stop, and three-phase unbalance protections.
- It is easy to install and simple to operate, featuring full and strong functions.
Specification
Product Name: Soft starter with internal bypass
Model: PEACO-ZJR2-B31850
Capacity: 250 hp (185 kW)
Current: 370A at 380V
Input Voltage*: Three phase 220V, 240V, 380V, 400V, 415V, 440V, 460V, 480V, 690V (optional)
Frequency: 50Hz/ 60Hz
Adaptive Motor: Squirrel-cage three-phase asynchronous motor
Starting Times: It is recommended not to exceed 20 times per hour.
Control Mode
1) Operation panel control.
2) Operation panel + external control.
3) External control.
4) External control + COM control.
5) Operation panel + external + COM control.
6) Operation panel + COM control.
7) COM control.
8) No start or stop operation.
Start Mode
1) Current-limiting to start.
2) Voltage ramp to start.
3) Torque control + current-limiting to start.
4) Torque control + voltage ramp to start.
5) Current ramp to start.
6) Voltage current-limiting double closed-loop start.
Stop Mode
1) Soft stop.
2) Free stop.
Protective Function:
1) Open loop protection for external instantaneous stop terminals.
2) Overheat protection for soft starters.
3) Protection for too long starting time.
4) Input open phase protection.
5) Output open phase protection.
6) Unbalanced three-phase protection.
7) Starting over current protection.
8) Running overload protection.
9) Under voltage protection for power voltage.
10) Overvoltage protection for power voltage.
11) Protection for fault parameter setting of the soft starter.
12) Load short circuit protection.
13) Auto restart or incorrect wiring protection.
14) Incorrect wiring protection of external control stop terminals.
Ambient
A place to be used: Indoor location with good ventilation free from corrosive gas and conductive dust.
Altitude: Below 1000M. It has to increase the soft starter rate power when the altitude is more than 1000M.
Temperature: -30℃~+55℃
Humidity: ≤90% RH (without dew condensation)
Vibration: ＜0.5G
Structure
Enclosure: IP 20
Cooling: Natural wind cooling.
Certification: CE, ISO9001
Warranty: 12 months
Outline Dimension (W1*H1*D): 265*525*240mm
Installation Dimension(W2*H2*d): 235*490*M8
Weight: 25 kg
Note: * denotes optional parameters; you can select every parameter in drop-down lists to complete your order.
Softer Starter Outline & Installation Dimension (Unit: mm)
Soft Start Wiring Diagram
Soft Starter Details
- Simple control panel. The control panel can be removed to clean, easy-to-operate, real-time data display on an LCD screen.
- Smart mainboard. Soft starter features fast response and multi-functions.
- Power control transformer. It is energy-saving, has a circulating circuit, and has high-quality coils with insulation isolation.
- Mutual inductor. the mutual inductor makes the soft starter more standard for measuring instruments, protection equipment, and automatic control equipment.
Soft Starter Application
This soft start series is widely used for motors starting in centrifuges, blowers, compressors, conveyors, mixers, ball mills, and other mechanical equipment.
