Reaction Torque Sensor, 1 Nm-10000 Nm, 0-10V, 0-20mA, RS485, Flange to Flange

The reaction torque sensor comes with flange to flange design, through hole structure. 1 Nm/ 20 Nm/ 100 Nm/ 1000Nm/ 5000Nm /10000 Nm capacity, 0.1% F.S repeatability, 5-wire connection. The static torque sensor signal is input to the signal transmitter and the transmitter outputs a variety of standard signals (output signal 0-10V, 0-5V, 4-20mA).

Reaction Torque Sensor Features

• Wide range of torque sensor capacity. 1 Nm-10000 Nm. 1 Nm, 20 Nm, 100 Nm, 300 Nm, 500 Nm, 1000 Nm, 2000 Nm, 3000 Nm, 5000 Nm, 10000 Nm, available for your choice.
• Custom torque sensor capacity. Torque sensor capacity can be customized for you if you have special requirements.
• Optional amplifier. A digital load cell amplifier is integrated with high accuracy 24-bit ADC (±0.2%F.S. ±1 byte), up to 80 times/s sampling speed making it suitable for both static measurement and dynamic measurement. It supports RS485 communication interface and amplified signal output 0-10V/ 0-5V/ 4-20mA proportional to the measured torque.
• Small size, light weight, a 5 pin male plug and no mounting base, easy to install and convenient use.
• The reaction torque sensor can measure static torque. Reaction torque measurement, non-rotating torque measurement with high detection accuracy, good stability.
• The static torque can be continuously measured without repeated zero adjustment.
• Comes with strong anti-interference, can be installed in any position and any direction.
• The strain elastomer is strong and can bear 150% load.

Reaction Torque Sensor Specifications

• Model: PEACO-DYJN101
• Capacity: 1 Nm, 20 Nm, 30Nm, 100 Nm, 300 Nm, 500 Nm, 1000 Nm, 2000 Nm, 3000 Nm, 5000 Nm, 10000 Nm (Optional)
• Output signal: 0-20mA, 0-10V, 0-5V, 4-20mA, RS485 (Optional)
• Material: aluminum alloy
• Output Sensitivity: 2.0mV/V
• Zero balance: ±2% F.S
• Non-linearity: 0.3% F.S
• Hysteresis: 0.1% F.S.
• Repeatability: 0.1% F.S
• Creep: 0.1%FS/30min
• Temperature drift on zero: 0.05% F.S/10℃
• Temperature effect on output: 0.05% F.S/10℃
• Impedance: 350Ω/700Ω
• Insulation resistance: ≥5000MΩ/100VDC
• Excitation voltage: DC 5-15V
• Operating temperature: -20℃~+80℃
• Humidity: 0~90% RH
• Safety overload: 120%
• Ultimate overload: 150%
• Protection class: IP65
• Cable size: Φ5mm x 3m
• Wiring: Exc+: Red, Exc-: Black, Sig+: Green, Sig-: White
• Warranty: 12 months
• Weight: 2.5-18 kg

Reaction Torque Sensor Applications

The static torque sensor is widely used in static torque testing system of testing machine, torque wrench, steering machine, electric actuator, valve and transmission.

Reaction Torque Sensor Dimension (unit: mm)

Sensor Wiring Diagram & Sensor Force Diagram