Custom
8 kVA Isolation Transformer 230V to 120V, Single Phase
- Stock: In Stock
- Model: PEACO-DG-8KVA
- SKU: PEACO-SPIT-8K
$1,865.67
Ex Tax: $1,865.67
Single phase isolation transformer comes with 8 kVA capacity is a step down isolation transformer with primary voltage 230V to secondary voltage 120V AC, frequency up to 50Hz/60Hz. Low regulation, H insulation level, 200 degree high temperature resistance material, high efficiency dry type isolation transformer for reducing the risk of electrical shock and protecting sensitive equipment from half-wave failures.
Technical Parameters
- Model : PEACO-DG-8KVA
- Capacity* : 8 kVA (Customized)
- Frequency : 50Hz/60Hz
- Primary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V...(Customized)
- Secondary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V...(Customized)
- Withstand voltage test : 100% tested. Primary to secondary 2.5kV AC/min; Primary to safety ground 2.5kV AC/min; Secondary to safety ground 2.5kV AC/min. (does not have both puncture and break-down)
- Insulation resistance : >100MΩ / DC500V
- Insulation class : H
- Overload capability : 300% for 10 seconds, 150% for 120 seconds
- Efficiency : ≥ 98% (on full load)
- Total Harmonic Distortion : ≤1%
- Power factor : 0.8
- Temperature rise limit : 100K (actual temperature minus ambient temperature)
- Enclosure protection grade : standard IP22 indoor ( contact us for customized electrostatic shield or IP54, IP65 outdoor).
- Cooling mode : Natural cooling / fan system cooling
- Display* : Analogue display, digital display.
Transformer Material
- Material : Transformer coil adopts 200 degree high temperature copper or aluminum wire.
- Winding material* : 100% copper or aluminum (Optional)
Working Environment
- Noise : ≤45dB (within 1m)
- Environment temperature : -20℃~+50℃, indoor enclosure, floor-mounted
Quality Assurance
- Standard : IEC60076-1, VDE0550, IEC439, JB5555, GB5226, etc.
- Certification : CE, RoHS and ISO:9001
- Design Life : 30 years
- Warranty : 1 year
Note :
- * denotes optional and customized parameters and you can select every parameter in drop-down lists to complete your order.
Features and Benefits
Peaco Support provides ultra isolation transformer with single phase, which is 1 to 1 isolation transformer and is available in the circuit of AC 50Hz/60Hz and voltage less than 1000V. Input and output voltage of all isolation transformer can be customized according to customer's special requirements. The single phase isolation transformer is widely used for the power supply of electronic instruments, machinery equipment, lighting, rectifying device, etc. Our transformers features low loss, low noise, stable performance, is fireproof, damp-proof and friendly envirenmental, are known for their reliability, durability and ease of implementation.
- Silicon Steel Sheet: New cold rolled silicon steel sheet, 0.27mm, 0.30mm, 0.35mm of thickness, excellent performance.
- Terminal Block: High quality terminal block, excellent temperature resistance, pressure resistance and flame retardancy for small power. For high power, transformer is made of quality copper material, with good electrical conductivity, high temperature resistance, not easy to burn out the equipment when short circuit happens.
- Enameled Wires: H class enamelled copper/aluminum wires, temperature resistance 200℃, winded tightly and uniformly, no insulating layer, high heat dissipation, service life ≥35 years.
- Bobbin: The bobbin of isolation transformer is made of nylon, high temperature resistance, great flame retardancy. The high power transformer with frameless design has ventilation slots between the coils for smooth air flows which reduce temperature of coils.
- Insulation Process: The 8 kVA isolation transformer adopts H-class vacuum impregnated insulation, temperature resistance of 200°C, lower noise, better insulation and is anti-rust and anti-corrosion.
Dimension (Unit:mm)
| Transformer Types | Dimension | Weight | |||
| Open Type | Mounting Size | Enclosed Type | Open Type | Enclosed Type | |
| Aluminium Wire | 240*270*260mm | 180*200mm | 380*530*560mm | 57kg | 75kg |
| Copper Wire | 240*260*260mm | 180*190mm | 380*530*560mm | 59kg | 82kg |
1 Phase Isolation Transformer Schematic Diagram
