Menu
Your Cart

24V 5A Switching Power Supply 100W

24V 5A Switching Power Supply 100W
24V 5A Switching Power Supply 100W
  • Stock: In Stock
  • Model: PEACO-S-100-24
  • SKU: PEACO-SMPS-100-24
$68.97
Ex Tax: $68.97
This product has a minimum quantity of 2
Free Shipping Worldwide.
By DHL/ FedEx/ UPS.
Lead Time 7-12 Days.
Mail Us for Lead Time of Custom Products.
MOQ 1.
Buy More Save More.

24 volt switching power supply features rated current 4.5A, 108W rated power, converting universal AC input to DC output. High performance SMPS power supply is widely used in industrial automatic control, research equipment, LED lighting, etc.

Features

  • AC input range can be selectable with switch.
  • SMPS power supply comes with short circuit / over load protections.
  • Switching power supply featues natural cooling, 100% full load burn-in test for reliable use.
  • Fixed switching frequency is at 25KHz.
  • Low cost, high reliability. 1 year warranty is available.

24V 5A SMPS Power Supply Specification
Model PEACO-S-100-24
Output DC Voltage 24V
Rated Current 4.5A
Current Range 0~4.5A
Rated Power 108W
Ripple & Noise (Max.) 100mVp-p
Voltage Adjustment Range 21.6~26.4V
Voltage Tolerance ±1.0%
Line Regulation ±0.2%
Load Regulation ±0.2%
Setup, Rise, Hold Time 200ms, 80ms, 20ms at full load.
Input Voltage Range 85~132V AC / 180~264V AC selected by switch, 255~370V DC
Frequency Range 47~63Hz
Efficiency 84%
AC Current 2.4A/115V AC, 1.2A/230V AC
Inrush Current (Max.) Cold start 30A/115V AC, 60A/230V AC
Leakage Current <1mA/240V AC
Protection Over Load 105~150% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
Environment Working Temperature -10 ~ +60℃ (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature & Humidity -20 ~ +85℃, 10 ~ 95% RH
Temperature Coefficient +0.03%/℃ (0~50℃)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMC Safety Standard Design refer to UL1012
Withstand Volatge I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI Conduction & Radiation Design refer to FCC Part15 J Conduction Class B
Others MTBF 322.4K hrs min. MIL-HDBK-217F (25℃)
Dimension 199*98*38mm (L*W*H)
Weight 0.68kg
Note 1. All parameters are measured at 230V AC input, rated load and 25℃ of ambient temperature if they are NOT specially mentioned.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.

SMPS Power Supply Details

Switching Power Supply

SMPS Power Supply Dimension (Unit: mm)

SMPS Power Supply Dimension

SMPS Power Supply Derating Curve

KNOWLEDGE BASE --- Switching Power Supply Working Principle
The working principle of switching power supply is different from that of linear power supply. Linear power supply makes the power transistor work in linear mode, while switching power supply makes the power transistor work in two working states, on and off. In other words, the amplitude of the input DC voltage is cut into the pulse voltage equal to the amplitude of the input voltage. When SMPS power supply is on, the voltage is low and the current is large, while off, the voltage is high and the current is small, namely, the loss generated on the power transistor is very small.
The switching power supply has two working modes: forward conversion and boost conversion. Although the circuit difference is small, the working process is very different and it is suitable for different occasions and requirements.

Write a review

Note: HTML is not translated!
Bad Good
Captcha