Menu
Your Cart

12V 10A Switching Power Supply 120W

12V 10A Switching Power Supply 120W
12V 10A Switching Power Supply 120W
  • Stock: In Stock
  • Model: PEACO-S-120-12
  • SKU: PEACO-SMPS-120-12
$85.92
Ex Tax: $85.92
This product has a minimum quantity of 2
Free Shipping Worldwide.
By DHL/ FedEx/ UPS.
Lead Time 7-12 Days.
Mail Us for Lead Time of Custom Products.
MOQ 1.
Buy More Save More.

12V 10A switching power supply converts 85A-264V AC full range of AC input to 12V DC output at 120W power, featuring metal net shell for strong heat dissipation ability, short circuit, overload protections. High performance AC-DC switching power supply for various industrial applications.

Features

  • AC input range can be selectable with switch.
  • AC to DC switching power supply comes with short circuit, overload, over voltage, over temperature protections.
  • Switching power supply featues natural cooling, 100% full load burn-in test for reliable use.
  • Fixed switching frequency is at 25KHz.
  • Low cost, high reliability. 2 years warranty is available.

12V 10A Switching Power Supply Specification
Model PEACO-S-120-12
Output DC Voltage 12V
Rated Current 10A
Current Range 0~10A
Rated Power 120W
Ripple & Noise (Max.) 100mVp-p
Voltage Adjustment Range ±10%
Voltage Precision ±1.0%
Line Regulation Rate <±0.5%
Load Regulation Rate <±0.5%
Input Voltage Range 90V~132V AC/180V~264V AC (selected by switch.)
Frequency Range 47Hz~63Hz (254V~370V DC)
Efficiency >82%
AC Current 2.8A/115V AC, 1.2A 220V AC, 1.4A/230V AC
Shock Current 50A 220V AC
Setup, Rise, Hold Time
200ms, 50ms, 20ms: 220V AC
Protection Over Load ≥ 105~150% rated output power
Protection type : Constant current output + VO drop to undervoltage point, cut off output, reset: power up again.
Short Circuit+VO drops to undervoltage point to close output.
Environment Working Temperature -10 ~ +50℃ (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature & Humidity -20 ~ +85℃, 10 ~ 95% RH
Temperature Coefficient +0.03%/℃ (0~50℃)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Safety Standard Design refer to TUA EN60950-1, EN60335-1, EN61558-1/-2-16, UL60950-1, GB4943
Withstand Volatge I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC last for 1min
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:500VDC/100MΩ
Leakage Current
Input - output 1.5kVA AC<5mA, Input - output 220V AC<1mA
Others MTBF 271.9K hrs min. MIL-HDBK-217F (25℃)
Dimension 199*98*38mm (L*W*H)
N.W/G.W. 535g/580.8g
Note 1. All parameters are measured at 230V AC input, rated load and 25℃ of ambient temperature if they are NOT specially mentioned.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. Linear adjustment rate test: testing from low vóltage to high voltage at rated load load.
5. Load adjustment rate test: from 0%-100% rated load.
6. The start-up time is measured in the cold start state and the fast and frequent booting and shutting down may increase the startup time.
7. When the altitude is above 2000 meters, the operating temperature should be lowered by 5℃/1000m.

SMPS Power Supply Details

Switching Power Supply

Switching Power Supply Diagram
Switching Power Supply Diagram

KNOWLEDGE BASE ---

Write a review

Note: HTML is not translated!
Bad Good
Captcha