- Stock: In Stock
- Model: PEACO-ADC200-2Z
- SKU: PEACO-ADC200-2Z
200A DC motor reversing contactor is equipped for continuous working duty, 2NO and 2NC contact arrangement. 12V dc reversing contactor, 24V dc reversing contactor, and 48V dc reversing contactor are options for coil voltage. The DC reversing contactor has high-content silver contacts, a full copper coil, featuring low power consumption and longer life, widely used in electric vehicle winch.
For a dc motor reversing contactor data datasheet, please visit here Peaco Support DC contactor catalogue.pdf.
Bill of Materials (BOM)
- The upper cover of the DC reversing contactor is made of BMC material, which features high mechanical strength, good heat resistance (it can be used under 200℃ for a long time), and good aging resistance.
- DC motor reversing contactor adopts high-quality stainless steel material.
- The contact assembly uses high-quality and high-conductivity copper and silver contacts, which are reliable in contact, more durable and safer, and have an electrical life of over 30,000 times.
- The DC contactor comes with Teflon magnetic material, 500,000 movements without abrasion, temperature resistance of 155℃, and enameled wire.
- The base and coil frame are made of reinforced nylon PA66, which has high strength, high-temperature resistance, better flame retardancy, and electrical properties.
Applications
The 200A DC reversing contactor has two sets of switching contacts which are used in electric control systems, such as automotive electric winches, telecommunication equipment, construction machinery, battery cars, electric forklifts, trains, ships, and uninterruptible power supplies (UPS).
Technical Parameters
- Model: PEACO-ADC200-2Z
- Contact Form: 2NO and 2NC
- Contact Load (Resistive): 1A~200A, 12VDC~60VDC
- Electric Life (Resistive): 20,000 times (200A 60VDC)
- Mechanical Life: 200,000 times
- Operation Duty: continuous working duty
- Max. Switching Current: ≤ 7Ie, ≤ 1s
- Contact Voltage Drop: ≤ 100mV
- Dielectric Withstanding Voltage (Between Coil and Contact, Between Open Contacts): 50Hz/60Hz 1500V AC/1min
- Pull-in Time: ≤ 30ms
- Drop-out Time: ≤ 20ms
- Max. Contact Bounce Time: ≤ 5ms
- Insulation Resistance: ≥ 50MΩ
- Load Terminal Size: M8 Internal Thread
- Coil Type: Single Coil
- Coil Rated Voltage: 12V, 24V, 36V, 60V
- Pull-in Voltage: ≤70%Us
- Drop-out Voltage: ≥ 5%, ≤ 40%Us
- Coil Power: ≤ 11W
- Dimension: 127*73*120mm
- Weight: 1760g
- Certification: CE, RoHS, ISO9001
- Warranty: 1 year
- Altitude: ＜2 km
- Temperature Range: -25℃~+55℃
- Humidity: 5%-85%
- Protection Grade: IP50
- Installation Method: Any installation
- Vibration: 2.5G Max. Sin 5Hz-50Hz
- Impact: 50g, 11ms (half-sine wave)
200A DC Reversing Contactor Dimension (Unit: mm)
DC Reversing Contactor Wiring Diagram
