1000W Wind Turbine, 48V, 3 Blades
- Stock: In Stock
- Model: PEACO-B3-1000
- SKU: PEACO-B3-1000
$1,497.59
Ex Tax: $1,497.59
1000W wind turbine for sale, low start-up wind speed 2.5m/s, low running vibration, strong wind resistance. 3 wind turbine blades with Aluminum alloy material, 48V rated voltage, Reliable wind power generator with low wind turbine cost and high quality with CE, ISO14001, ISO9001 certified. The wind turbine generator can be use with inverter, PV panels, battery and MPPT solar charge controller.
Specification
| Model | PEACO-B3-1000 | Start-up Wind Speed | 2.5m/s |
| Rated Power | 1000W | Rated Wind Speed | 12.5m/s |
| Maximum Power | 1200W | Safe Wind Speed | 40m/s |
| Rated Voltage | 48V | Wind Wheel Diameter | 2.4m |
| Wind Turbine Blades Qty | 3 | Controller System | Electromagnet |
| Blades Material | FRP | Wind Direction Adjustment | Automatic adjustment of wind angle |
| Generator Type | Three-phase AC permanent magnet | Working Temperature |
-40°C~80°C |
| Blades Height |
1050mm |
Certification |
CE, ISO14001, ISO9001 |
| Generator Shell Material | Aluminum alloy | Service Life |
15 years |
| Top Weight | 31.0 kg | Warranty |
2 years |
1. High Security. The vertical blade and triangular double-fulcrum designs are adopted, the main force points focus on the hub to avoid blades to lose, break and fly out.
2. High Wind Resistance. Horizontal rotation makes it only bear a small wind pressure, thus, it can stand up to 45 m/s typhoon.
3. Rotation Radius. The wind turbine has a smaller radius of rotation than that of other wind turbines based on its special design structure and operating principle. It saves space as well as improve efficiency.
4. Power Generation Curve Characteristics. The start-up wind speed of wind turbine is lower than that of other wind turbines, the increasing rate of power generation is relatively gentle, so it could produce 10% ~ 30% more power than others between 5-8m/s range.
5. Brake Device. The blade itself has speed protection and mechanical manual and electronic brakes can be equipped. So that manual brake can be done in typhoon and super strongly windy area.
6. A3 steel material is used on housing. Small size, light weight, low running vibration.
7. High strength, flange Installation and easy installation and maintenance.
8. Wind turbine comes with reinforced FRP blades, optimized aerodynamic shape design and structural design, low start-up wind speed, higher utilization of wind energy and more annual power generation.
9. The rudder adopts automatic yaw design, fold-tail type. it has stronger resistance to typhoon and is safe and reliable during operation.
10. Magnetic steel material is NdFeB and wind tubine is equipped with permanent manet rotor alternator with special design, which effectively reduces the reluctance torque of the generator and at the same time provides better matching of the wind wheel and generator and running reliability.
11. Optional maximum power point tracking intelligent controller could adjust the current effectively.
900W Wind Turbine Exploded View and Dimension (Unit: mm)
1. Wind turbine body 2. Wind turbine flange seat 3. Tower 4. Wind turbine shaft 5. Wind hub 6. Wind wheel 7. Lock nut
8. Fairing 9. Bolt 10. Flat washer 11. Elastic washer 12. Nuts 13. Stainless steel nut 14. Anti-loose nut 15. Rubber pad
