Menu
Your Cart

High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke

High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
High Speed Linear Actuator, 12V/24V, 32mm/s, 4000N, 50-600mm Stroke
  • Stock: In Stock
  • Model: PEACO-DJ810
  • SKU: PEACO-DJ810
$169.68
Ex Tax: $169.68

Available Options

Free Shipping Worldwide.
By DHL/ FedEx/ UPS.
Lead Time 7-12 Days.
Mail Us for Lead Time of Custom Products.
MOQ 1.
Buy More Save More.
High speed linear actuator comes with 32mm/s travel speed, 12V/ 24V DC voltage, max. dynamic load 4000N, standard & custom 50mm~600mm stroke length, aluminum alloy shaft, limit switches built at both ends, hall sensor position feedback is available. It is also a hospital bed linear actuator widely applied to indoor massage chairs, functional sofas, automatic window openings, medical equipment, etc.
Features
  • With micro DC permanent magnet motor, small size, low noise about 40db, easy to install.
  • Optional 50mm~600mm stroke length, 50N~4000N load capacity and other strokes and loads can be customized according to your needs.
  • High speed linear actuator, max. working speed up to 32mm/s.
  • Signal feedback Hall sensor is supported.
  • Comes with built-in limit switches to prevent over travel (extension, with safety nut.
  • Equipped with metal gear, stable quality and long service life.
  • Can automatically stop at fully open and fully close position.
  • Widely used in robotic vehicles, automatic guidance vehicles, camper, door openers, floor cleaning equipment, lawn mower, snow plow, boat, solar tracker system, wheelchairs, harvesting machine, construction machine, etc.
Specification
  • Model: PEACO-DJ810
  • Input Voltage*: 12V/24V DC (36V/48V DC can be also customized.)
  • Stroke Length*: 50/ 100/ 150/ 200/ 250/ 300/ 350/ 400/ 450/ 500/ 550/ 600mm (optional and customized)
  • Load Capacity*: 50/ 100/ 150/ 200/ 400/ 450/ 500/ 600/ 700/ 800/ 1000/ 1200/ 1500/ 2000/ 3000/ 4000N (optional and customized)
  • Max. Dynamic Load: 4000N
  • Travel Speed: 5 to 32mm/s
  • Limited Switch: Integrated
  • Duty Cycle: 10% (2 min continuous moving)
  • IP Rating: IP43 (indoor use)
  • Operating Temperature: -40°C~+65°C
  • Signal Feedback*: Hall sensor
  • Cable Length: 500mm (the motor wire and its length can customized)
  • Certification: CE
  • Weight: 1kg-8 kg
Note: * denotes optional or customized parameters and you can select every parameter in drop-down lists to complete your order.
Linear Actuator Load, Stroke and Speed Selection
Code* Dynamic Load (N) Speed (mm/s) (12V) Speed (mm/s) (24V) Current (Amp) (12V) Current (Amp) (24V)
Free Load Full Load Free Load Full Load
Free Load Full Load Free Load Full Load Up Down Up Down
A 4000 5 4 5 4.0 <1.2 <2.0 4 <0.6 <1.2 <3.5
B 3000 7 5.2 7 5.2 <1.2 <2.0 5.2 <0.6 <1.2 <3.5
C 2500 10 8.1 10 8.1 <1.2 <2.0 8.1 <0.6 <1.2 <3.5
D 2000 13 / 13 10.4 / / / <0.6 <1.2 <3.5
E 1500 16 / 16 11 / / / <0.8 <1.5 <3.5
F 1000 20 / 20 15 / / / <0.8 <1.5 <3.5
G 800 32 / 32 23.5 / / / <0.8 <1.5 <3.5
Note: The table shows the measured data at room temperature. Due to the influence of parts processing and installation accuracy, measurement error, etc., a single linear actuator will deviate from the data in the table and the maximum deviation may reach ±10%.
Linear Actuator Dimension (mm)
Linear Actuator Dimension
Strokes in Different Load Ranges
S: Stroke range (mm) Load capacity (N) Installation Length (mm)
20≤S≤250 0-4000 L=S+(145-150)
250<S≤350 0-3000 L=S+150
350<S≤450 0-2000 L=S+150
450<S≤600 0-1000 L=S+175
600<S≤800 0-500 L=S+225
800<S 0-200 L=S+300
Note:
1. The longer the stroke of the linear actuator is, the smaller max. load it can bear.
2. With the same stroke, the faster the linear actuator speed is, the smaller max. load it can bear.
3. In the case of the same stroke and speed, the maximum load that can be borne by the side force component is smaller than that only by the axial force.
Front End Installation Types
Linear Actuator Front End Installation Type
00 : Pad cap, hole diameter Φ10mm (in stock)
03 : Grooving, groove width 6mm, groove depth 28mm, hole diameter Φ10mm (in stock)
06 : Grooving, groove width 6mm, groove depth 28mm, hole diameter Φ12.7mm (long lead time)
Linear Actuator Front End Installation Type
22 : Grooving, groove width 6mm, groove depth 28mm, hole diameter Φ12.5mm (in stock)
23 : No grooving, hole diameter Φ12.5mm, hole diameter with plastic cap Φ10.5mm (long lead time)
09 : Grooving, groove width 6mm, groove depth 28mm, hole diameter Φ12mm (long lead time)
Linear Actuator Front End Installation Type
21 : No grooving, hole diameter Φ10mm (in stock)
16 : No grooving, hole diameter Φ12mm (long lead time)
14 : No grooving, hole diameter Φ12.7mm (long lead time)
18 : Cylindrical screw hole M10 (can be equipped with joint bearing)
Linear Actuator Applications

Linear Actuator Applications

Write a review

Note: HTML is not translated!
Bad Good
Captcha