70 hp Phase Converter, 50 kW Single Phase to 3 Phase Converter

For the user manual of phase converters, please contact us.

Features

The output waveform of the 70 hp phase converter converted by the phase converter is a pure sine wave with an output phase angle of 120 degrees, the total harmonic distortion rate (THD) is less than 3% (Linear load) which totally meets the international power quality standards and are widely applicable to various load such as robot arms, electric welding machines, argon arc welding machines, electric hoists, rolling gates, packaging machines, chocolate coating machines, motors, lathes, elevators, commissioning inverters, compressors, high precision control equipment, etc.

Peaco Support 1-phase to 3-phase converters solve the inconvenience caused by the three-phase power supply curtailment to production in some areas or the mismatched equipment voltage. It also solves the needs of some users who cannot apply for three-phase power due to site restrictions.

1. Multiple functions: The single to three-phase converter adopts the newest generation efficient IPM intelligent module aboard, comes with high efficiency and stable performance, and full protection functions such as input under-voltage, overvoltage, output overcurrent, short circuit, overheating, etc. Longer service life with 15 years or more.
2. Step-down start & frequency conversion start: With the dual-mode start selection function through a 4-inch LCD setting, you can set two modes of step-down voltage start and variable frequency conversion start. In such a way, the power of the phase converter can be fully utilized and is no longer necessary to expand the capacity of the converter when it is equipped with an inductive load motor, which helps users save costs.
3. Pure sine wave: The single-phase to 3-phase converter features pure sine wave output with a good transient response of less than 50ms, higher conversion efficiency, and stable output voltage. Single-phase to 3-phase converter housing is made of cold rolled steel plate sprayed.
4. Low-frequency transformer: 50kW phase converter adopts a low-frequency transformer which ensures both the input voltage and output voltage are completely electrically isolated to avoid interference which is very safe for the users.
5. SVPWM space vector algorithm is used in the 50kW phase converter so that it is available with high conversion efficiency, high instant power, and low no-load loss conversion efficiency can reach more than 94% and no-load loss is small.
6. Fault alarm and 24hrs working: High practicability, high stability, high vibration resistance, no noise, low pollution.
7. The electrical phase converter has the function of filtering the grid disturbance and interference at the same time which is a high-performance power supply for stabilizing both voltage and frequency, providing a more stable and pure power supply for user's devices.
8. DC input is also optional: Suitable for insufficient input power with DC as a supplement.
   
9. Custom service: Peaco Support offers customization services for phase converters such as the input voltage, output voltage, frequency, and phase of the phase converter users' needs.

Specifications