100 hp (70 kW) Single Phase to 3 Phase Converter
- Stock: In Stock
- Model: PEACO-T-70KW
- SKU: PEACO-STP-70K
$33,289.58
Ex Tax: $33,289.58
High performance 100 hp (70 kW) single phase to three phase converter features 50Hz/60Hz output frequency. To achieve 106A (380V) three-phase current needs a 318A (220V) single-phase dedicated circuit in the front side panel. Pure sine wave output with a good transient response of less than 50ms, multiple protections such as under-voltage, overvoltage, overcurrent, overheating, and short circuit. Optional input voltage 220V, 240V, 440V, 110/220V, 120/240V and output option voltage for three phase converter 220V, 240V, 380V, 400V, 415V, 440V, 460V, 480V, etc.
For the user manual of phase converters, please contact us.
Features
The output waveform of the 70 kW phase converter converted by the phase converter is a pure sine wave with a phase angle of 120 degrees, a total harmonic distortion rate (THD) is less than 3% (Linear load) which totally meets the international power quality standards and are widely applicable to various load such as robot arms, electric welding machines, argon arc welding machines, electric hoists, rolling gates, packaging machines, chocolate coating machines, motors, lathes, elevators, commissioning inverters, compressors, high precision types of equipment, etc.
Peaco Support 1-phase to 3-phase converters solve the inconvenience caused by the three-phase power supply curtailment to production in some areas or the mismatched equipment voltage. It also solves the needs of some users who cannot apply for three-phase power due to site restrictions.
- Multiple functions: The single to three-phase converter adopts the newest generation efficient IPM intelligent module aboard, comes with high efficiency and stable performance, and full protection functions such as input under-voltage, overvoltage, output overcurrent, short circuit, overheating, etc. Longer service life with 15 years or more.
- Step-down start & frequency conversion start: With the dual-mode start selection function through a 4-inch LCD setting, you can set two modes of step-down voltage start and variable frequency conversion start. In such a way, the power of the phase converter can be fully utilized and is no longer necessary to expand the converter's capacity when it is equipped with an inductive load motor, which helps users save cost.
- Pure sine wave: The single-phase converter to 3-phase features pure sine wave output with a good transient response of less than 50ms, waveform distortion is very little up to less than 3%, higher conversion efficiency, and stable output voltage. Single-phase to 3-phase converter housing is made of cold rolled steel plate sprayed.
- Low-frequency transformer: 70 kW phase converter adopts a low-frequency transformer which ensures both the input voltage and output voltage are completely electrically isolated to avoid interference which is very safe for the users.
- SVPWM space vector algorithm is used in the phase converter so that it is available with high conversion efficiency, high instant power, and low no-load loss conversion efficiency can reach more than 94% and no-load loss is small.
- Fault alarm and 24hrs working: High practicability, high stability, high vibration resistance, no noise, low pollution.
- The electrical phase converter has the function of filtering the grid disturbance and interference at the same time which is a high-performance power supply for stabilizing both voltage and frequency, providing a more stable and pure power supply for user's devices.
- DC input is also optional: Suitable for insufficient input power with DC as a supplement.
- Custom service: Peaco Support provides customization services for customers worldwide such as the input voltage, output voltage, frequency, and phase of the phase converter for users' needs.
Specifications
| Model | PEACO-T-70KW | |
| Isolation mode | Low Frequency Transformer | |
| Housing material | Cold rolled steel plate sprayed | |
| AC Input | Input rated voltage | Single phase 220V AC |
| Input rated voltage range* | 110/120/220/230/240V/380V/415V/440V/480V AC (Optional) | |
| Input rated current | 318A, 220V | |
| Input Frequency* | 50Hz/60Hz | |
| AC Output | Rated output power | 100 hp (70 kW) |
| Output waveform | Pure sine wave | |
| Phases | Three phase, 4 wire | |
| Output rated voltage | 380VAC ±3% | |
| Output voltage range* | 220/380/400/415/440/480V AC (Optional) | |
| Output rated current | 106A (phase current), 380V | |
| Output Frequency* | 50Hz/60Hz±0.05Hz | |
| Power Factor (PF) | 1 | |
| Overload Ability | 150%, 10s | |
| Efficiency | ＞94% | |
| Waveform distortion rate (THD) | ＜3% (Linear load) | |
| Dynamic Response (0 to 100% load) | 5%, ≤50ms | |
| Display LCD | Output voltage, output current, output power, output frequency, fault code, time temperature, startup mode selection, setting parameters | |
| Running mode | Working continuously | |
| Electrical insulation | 2000V AC, 1 Minute | |
| Protection Function | Protection | Input under voltage, over voltage, output over-current, short circuit, overheating, etc |
| Cooling method | Fan-cooled | |
| Short-circuit protection | No automatic recovery, need to restart the machine | |
| Working environment | Ambient temperature | -15℃~+55℃ |
| Humidity | 0~90%, No condensation | |
| Noise (1 meter) | ≤50dB | |
| Protection Grade | IP20 (indoor) | |
| Altitude | ≤2000m | |
| Others | Dimension | 700*750*1300mm |
| G.W. / N.W. | 295kg / 270kg for aluminum coil type, 310 kg / 295 kg for copper coil type | |
| Certification / Warranty | CE / 1 year | |
Note: * denotes optional or customized parameters; you can select every parameter in drop-down lists to complete your order.
Phase Converter Applications
